WIRELESS ROUTER ADSL2+ - Atlantis Land

WIRELESS ROUTER ADSL2+
3.4.2 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
LAN Port
IP address
Subnet Mask
DHCP
function
server
192.168.1.254
255.255.255.0
Enabled
3.5 Information from the ISP
WAN Port
Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System
(DNS) IP address (it can be automatically assigned from
ISP or be set fixed).
PPPoA
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, and Domain Name System (DNS) IP
address (it can be automatically assigned from ISP or
be set fixed).
RFC1483 Bridged VPI/VCI, VC-based/LLC-based multiplexing and configure
this product into BRIDGE Mode.
RFC1483 Routed VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name
System (DNS) IP address (it is fixed IP address).
IPoA
VPI/VCI, IP address, Subnet mask, Gateway address,
and Domain Name System (DNS) IP address (it is fixed
IP address).
3.6 Configuring with the Web Browser
Open the web browser, enter the local port IP address of this Wireless Router ADSL2+,
which defaults at http://192.168.1.254, and click “Go”, a username and password window
will appear. The default username & password are admin & atlantis, in respectively
N/A
18