Ocean Wardrobe instructions - Mamas & Papas

instructions
ocean wardrobe
FR038W:V8/08/07
© Mamas & Papas (Holdings) Ltd. 2007
IMPORTANT: Please read instructions carefully
and keep for future reference
Important: Please read
these instructions
carefully before
starting to assemble
your product.
Important: the
assembly of this
product requires
two people.

ocean Wardrobe
Before assembling your product...
Do not discard any packaging until you are certain you have all the correct components and fittings.
If any items are damaged or missing, please contact your retailer or Mamas & Papas on 0870 8307700.
Allow plenty of time and space when beginning the construction of your product.
Components
10
21
18
8
17
13
15
23
12
20
19
2
14
16
4
3
28
27
26
24
25
7
11 9
5
22
6
1
Item Name Part no. Qty
1 Drawer front 000000000000 1
2 Handles 000000000000 4
3 Left drawer side 000000000000 1
4 Right drawer side 000000000000 1
5 Drawer support 000000000000 1
6 Drawer bases 000000000000 2
7 Drawer back 000000000000 1
8 Right side panel 000000000000 1
9 Closed hanger brackets 000000000000 2
10 Left side panel 000000000000 1
11 Open hanger brackets 000000000000 2
12 Fixed shelf 000000000000 1
13 Top front rail 000000000000 1
14 Bottom front rail 000000000000 1
Item Name Part no. Qty
15 Top back rail 000000000000 1
16 Bottom back rail 000000000000 1
17 Back panels 000000000000 2
18 H-section 000000000000 1
19 Narrow door stop 000000000000 1
20 Wide door stop 000000000000 1
21 Top 000000000000 1
22 Hanger rails 000000000000 2
23 Shelf 000000000000 1
24 Left door 000000000000 1
25 Right door 000000000000 1
26 Door hanger rail 000000000000 1
27 Left door hanger bracket 000000000000 1
28 Right door hanger bracket 000000000000 1
--

FITTINGS
A x 6 B x 8
Cam stud
C x 6
Handle screws
D x 31
Cams
E x 2
Long screws
F x 6
Runners (1x left & 1x right hand versions)
G x 4
Runner screws
H x 6
Shelf studs
I x 24
Hinge plates
J x 14
Short screws
K x 1
Short bolts
L x 8
Allen key
M x 8
Rail inserts
N x 1
Long bolts
O x 1
Wall strap screw
P x 1
Washer
Q x 6
Wall strap
R x 1
Hinge arms
TOOLS
Screwdriver
Fitting code: 000000000000
Hammer
Cross head screwdriver
Important: The use of powered screwdrivers is not recommended for assembling this product.
--

A
STEP 1
Screw six cam studs
(A) into the holes in the
back of the drawer front
(1) using a cross-head
screwdriver.
1
B
STEP 2
Attach two of the handles
(2) to the drawer front
using four handle screws
(C) and a cross head
screwdriver.
2
--

C
STEP 3
Slot the left and right
drawer sides (3/4) onto
the drawer front (1).
Insert four cams (C)
into the holes in the
side panels. Turn the
cams clockwise with the
screwdriver (R) to lock
the sides to the drawer
front.
4
3
1
C
STEP 4
Slot the drawer support
(5) onto the drawer front.
Insert two cams (C) and
turn clockwise with the
screwdriver (R).
5
--

6
STEP 5
Insert the two drawer
bases (6) into the grooves
in the drawer sides, back
and support rail.
D
7
STEP 6
Slot the drawer back
(7) onto the assembled
sections of the drawer.
Fasten the drawer back to
the support rail using two
longs screws (D) and a
cross head screwdriver.
--

D
STEP 7
Fasten the sides of the
drawer to the drawer
back with six long screws
(D) using a cross head
screwdriver.
D
9
STEP 8
Select the right side panel
(8) and lay it on the floor
as shown in the diagram.
Attach the two closed
hanger brackets (9) to
the side panel using eight
long screws (D) and a
cross head screwdriver.
8
--

E
STEP 9
Attach the right hand
carcass runner (E) to the
side panel using three
small screws (F) and a
cross head screwdriver.
F
G
Step 10
Screw two of the shelf
studs (G) into one of the
three height position in
the side panel.
--

I
H
Step 11
Attach three of the hinge
plates (H) to the side
using six of the small
screws (I).
D
11
Step 12
Select the left side panel
(10) and attach the two
open hanger brackets
(11) using six long screws
(D) and a cross head
screwdriver.
10
--

E
F
STEP 13
Attach the remaining
carcass runner (E) to the
side using three small
screws (F).
G
STEP 14
Screw the two remaining
shelf studs (G) into the
side panel.
The studs must be fitted
at the same height as
those on the right side
panel.
-10-

H
I
STEP 15
Screw the three hinge
plates (H) to the side
panel using six small
screws (I).
K
J
STEP 16
Slot the fixed shelf (12)
onto the left side panel as
shown in the diagram.
Fasten the fixed shelf to
the side panel using two
short bolts (J) and the
allen key (K).
12
-11-

M
K
L
13
STEP 17
Slot the top (13) and
bottom (14) front rails
onto the side panel as
shown.
Slot rail inserts (L) into
the rails.
Slot long bolts (M)
through the holes in the
middle of the rail inserts.
Tighten the bolts into the
side using the allen key
(K).
14
M
K
STEP 18
Slot the top (15) and
bottom (16) back rails
onto the side panel as
shown.
Slot rail inserts (L) into
the rails.
Slot long bolts (M)
through the holes in the
middle of the rail inserts.
Tighten the bolts into the
side using the allen key
(K).
16
L
15
-12-

STEP 19
Slot one of the back
panels (17) into the
grooves in the top and
bottom back rails. Push
the panel down into the
recess in the side panel.
Slot the H-section (18)
onto the inserted back
panel. Make sure the hole
in the H-section is aligned
with the pilot hole in the
back of the fixed shelf.
Slot the remaining back
panel into the grooves in
the rails and push down
into the H-section.
Fasten the H-section to
the fixed shelf with a long
screw (D) and a cross
head screwdriver.
17
18
D
M
8
STEP 20
With the help of another
person, slot the right
side panel (8) onto the
assembled sections.
Fasten the rails to the
side panel using four
rail inserts and four long
bolts.
Before tightening the
bolts ensure that the back
panel is inserted into the
groove in the right side
panel.
L
K
-13-

19
20
STEP 21
Attach the narrow door
stop (19) to the front of
the fixed shelf using two
long screws.
Attach the wide door stop
(20) to the inside of the
top front rail using two
long screws.
D
D
21
STEP 22
Attach the wall strap to
the back of the top (21).
Slot the wall strap screw
(N) through the washer
(O) then through the wall
strap (P).
Tighten the screws into
the top using a cross head
screwdriver.
N
O
P
-14-

J
STEP 23
Slot the top (21) onto
the end of the assembled
wardrobe.
Fasten the top to the rails
and side panels using ten
short bolts (J) and the
allen key (K).
K
21
STEP 24
With the help of another
person, lift the wardrobe
upright.
Slot the two hanger rails
(22) first into the closed
hanger brackets, then
lower the other end into
the open hanger brackets.
22
-15-

STEP 25
Slot the shelf (23) onto
the four shelf studs.
23
D
STEP 26
Select the left door (24).
Slot the door hanger rail
(26) into the holes in the
left (27) and right (28)
door hanger brackets as
shown.
Fasten the brakets to
the door using four long
screws (D) and a cross
head screwdriver.
27
26
28
24
-16-

I
B
Q
STEP 27
Slot three of the hinge
arms (Q) into the holes in
the door.
Fasten the hinge arms to
the door using six short
screws (I) and a cross
head screwdriver.
Attach one of the handles
(2) to the door using two
handle screws (B) and a
cross head screwdriver.
2
Q
I
B
STEP 28
Select the right door (25).
Attach the three
remaining hinge arms (Q)
to the door using the six
short screws (I).
Attach the remaining door
handle (2) to the door
using two handle screws
(B).
25
2
-17-

STEP 29
Attach the doors to the
wardrobe.
Slot the hooks on the
back of the hinge arms
under the front of the
hinge plate.
Push the ends of the
hinge arms down onto the
hinge plate until they lock
into place.
To remove the hinge arms,
push the buttons on
the ends inwards whilst
pulling ht ends of the
arms off the hinge plates.
STEP 30
Extend the drawer
runners from inside the
wardrobe and lower the
drawer onto the runners.
Slide the drawer
backwards whilst holding
the runners in place so
that the hooks on the
back of the runner slot
into the holes in the back
of the drawer.
Slot the pins on the front
of the runners into the
holes in the undersides of
the drawer sides.
Slide the drawer into the
wardrobe.
-18-

Adjusting the gap
between the doors.
Loosen screw ‘A’, turn
screw ‘B’ clockwise or
anti-clockwise until the
gap between the doors is
equal then tighten screw
‘A’.
step 36
Adjusting the height of
the doors.
Loosen screws ‘C’ then
slide the hinge plate up
or down until the doors
are even then tighten the
screws.
Adjusting the angle of
the door.
Loosen screw ‘A’ and
slide the hinge arm either
forwards or backwards
until the door is vertical
then tighten screw ‘A’.
The wardrobe is now fully
assembled. Check that
all of the fittings are fully
tightened before use.
-19-

WALL STRAP INFORMATION
The wall strap is only intended to be used with the Mamas and Papas product that it is
supplied with.
Never attempt to modify or change the wall attachment strap in any way. Never use any
other fittings for attaching the strap to your furniture than those supplied.
Never use the screw provided to attach the strap to the wall. No wall attachment fittings are
supplied. This is because the type of fittings required to attach the strap to the chosen wall
is determined by the walls composition. If you are in any doubt about the correct type of
fittings to use, consult a professional before attempting to attach the strap to the wall.
The wall strap must not be used to replace any other fitting supplied with your piece of
furniture.
Furniture falling over is generally due to the surface the furniture is placed on. A warped
floor or wall-to-wall carpeting will enable the furniture to rock, so greatly increasing the
potential for the furniture to fall. If the furniture is placed on a flat level wood or tiled floor
the risk is reduced, but we still recommend the wall strap is fitted.
INSTRUCTIONS FOR SAFE USE & maintenance
• WARNING: DO NOT LEAVE YOUR CHILD UNATTENDED. The safety of your child is your
responsibility.
• Before use, ensure the wardrobe is on a stable, level surface.
• Do not allow children to climb on the wardrobe.
• Never use the wardrobe if any parts are broken or missing.
• Never pivot or drag the wardrobe on its plinth, the wardrobe must always be lifted by at
least two people when moved.
• Do not place the wardrobe in the near vicinity of open fires or other sources of strong
heat, such as electric or gas fires.
• Always leave the wardrobe clean and dry. Wipe away any spillage straight away. The
wardrobe can be cleaned with a damp cloth. Never use abrasive, bleach or strong
detergents.
• Check regularly that all fittings and screws are correctly tightened and are not
damaged. Loose screws can pinch parts of the body and clothing resulting in the risk of
strangulation.
Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in
these instructions. We reserve the right to change the specifications of any product without prior notice.
After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please
contact Customer Services on: 0870 8307700, or e-mail us at: customer.services@mamasandpapas.com.
Visit our website at www.mamasandpapas.com for the latest product information.
-20-