PERFORMANCE WORK STATEMENT ATCT / BB and TRACON ...

. Ensure timer and photocell are operating and set correctly; repair/replace as
needed, IAW operation manual.
M2. Faucets/General Plumbing
a. Inspect all faucets for proper operation - adjust or replace as needed.
b. Adjust faucet handles for proper alignment.
c. Inspect flush valves — adjust or repair as needed.
M3. Elevators ("tasks to be completed by ThyssenKrupp with maintenance contractor
overview')
air *> Provide escort as needed for TRACON passenger and freight elevator, and TOC
passenger and freight elevator.
M4. Roof and Caulking
a. Inspect roof for tears in membrane, even distribution of ballast, proper roof and
gutter drainage, exterior caulking in need of repair, and security of flashing and
roof components; repair as necessary.
M5. Flag Pole
a. Inspect halyard, turnbuckle, and pole. Repair, replace, or repaint as needed.
M6. Guard Shack
a. Inspect guard shack systems (electrical, plumbing, doors, and structure) for proper
operation and repair or replace as needed. Complete exterior/interior painting as
needed.
M7. Refrigeration Equipment (dining room refrigerator and icemaker)
a. Clean dust and dirt from condenser fins.
b. Clean door gaskets.
c. Check and tighten all electrical connections.
d. Ensure unit refrigerant is correct - add as needed.
e. Check actual vs. set temperature - adjust as needed.
f. Check and clean condensate drains.
g. Check and record amperage of unit.
h. Check and record evap temperature both in and out and ambient temperature,
i. Clean around unit.
M8. Carpet Tiles
a. Replace damaged, worn, or soiled carpet tiles as requested by the COR.
Mil. Insect Control
a. Perform escort as needed.
M12. Central Vacuum System
a. Test operation of unit
b. Inspect dirt collection bags for tears, rips, and functionality. Repair, replace, clean as
needed.
c. Ensure vacuum suction pressure is 4.0 HG
d. Check and record motor amperage against manufacture data.