User's Guide
User's Guide
User's Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2. How to use SDS 200A/SoftScope<br />
Cycle RMS<br />
Positive Overshoot<br />
Negative Overshoot<br />
Period<br />
Frequency<br />
Rise time<br />
Fall time<br />
Positive Duty Cycle<br />
Negative Duty Cycle<br />
Positive Pulse Width<br />
Negative Pulse Width<br />
Next<br />
- The Root Mean Square voltage over the first cycle in the waveform<br />
- Positive Overshoot = (Max - Top)/Amp x 100 %<br />
- Measured over the entire waveform<br />
- Negative Overshoot = (Base - Min)/Amp x 100 %<br />
- Measured over the entire waveform<br />
- Time to take for the first signal cycle to complete in the waveform<br />
- Measured in seconds<br />
- Reciprocal of the period of the first cycle in the waveform<br />
- Measured in Hertz(Hz)<br />
- Time taken from lower threshold to upper threshold<br />
- Time taken from upper threshold to lower threshold<br />
- Positive Duty Cycle = (Positive Pulse Width)/Period x 100%<br />
- Measured of the first cycle in waveform<br />
- Negative Duty Cycle = (Negative Pulse Width)/Period x 100%<br />
- Measured of the first cycle in waveform<br />
- Measured of the first positive pulse in the waveform<br />
- The time between the 50% amplitude points<br />
- Measured of the first<br />
- View next icons<br />
22
Change language