PRODUCTS AND CONCEPTS FOR - El-Cab Sp. z oo
PRODUCTS AND CONCEPTS FOR - El-Cab Sp. z oo
PRODUCTS AND CONCEPTS FOR - El-Cab Sp. z oo
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Plug and play<br />
Upon request, HÜBNER supplies you with completely<br />
preassembled systems, including all the wires – just-intime<br />
– for your production.<br />
POWER<br />
CONNECTION<br />
SYSTEMS<br />
HÜBNER‘s power connection systems are<br />
integrated into the vehicle structure in an<br />
individually optimised way. We place particularly<br />
high importance on certified quality: every set of<br />
wiring can be thoroughly tested on a test rig.<br />
Power connection – perfectly c<strong>oo</strong>rdinated<br />
Everything can be perfectly c<strong>oo</strong>rdinated, from the number and<br />
measurements of the wires to their stiffness and arrangement in<br />
relation to one another. As a result, your wiring systems always<br />
participate in all the movements thus reducing wear on the moved<br />
wires to a minimum.<br />
Power connection for articulation systems<br />
With universal and compact articulation systems, it is possible to<br />
route hose and electrical wires flexibly through and around the<br />
articulation without having a negative impact on the fl<strong>oo</strong>r height of<br />
the vehicle. This means that wires with a diameter of 30 mm can<br />
be routed directly through the articulation. For all other HÜBNER<br />
articulation systems or in the event of high-fl<strong>oo</strong>r buses, the wires<br />
can also be routed under the articulation.<br />
Power connection in the side area<br />
For the power connection in the side area, the cables, wires and<br />
spiral hosing are designed in such a way that they are optimally<br />
routed for every possible tilt angle of the articulation.<br />
Power connection in the r<strong>oo</strong>f area<br />
Power connection systems are frequently installed in the r<strong>oo</strong>f<br />
area in low-fl<strong>oo</strong>r buses. For this, HÜBNER uses the C-shaped<br />
power connection system. This kind of installation allows a<br />
natural movement of the wires and thus prevents movements<br />
that frequently lead to the buckling and bending of hoses. The<br />
separation plates mounted on the front and rear car serve as<br />
a clear interface to the vehicle.<br />
Power connection for hybrid, CNG<br />
and trolley buses<br />
The wires can be routed outside the buses for hybrid, CNG and<br />
trolley buses. The specific influences of UV and the weather are<br />
taken into special consideration. The system can have a very<br />
attractive visual design: we can disguise the wires with side<br />
panels for the folding bellows, which can be individually adapted<br />
to the vehicle design.<br />
16 17