PRODUCTS AND CONCEPTS FOR - El-Cab Sp. z oo
PRODUCTS AND CONCEPTS FOR - El-Cab Sp. z oo
PRODUCTS AND CONCEPTS FOR - El-Cab Sp. z oo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>El</strong>ectrical ramp SKADI ®<br />
RAMPS & LIFTS<br />
Get on board comfortably, travel without stress.<br />
Entrance systems for buses made by HÜBNER<br />
Transportation create freedom for people with<br />
limited mobility. Our ramp systems and the EXEO<br />
lift meet the highest safety and quality requirements.<br />
We offer tailor-made solutions for almost<br />
every type of vehicle. Perfect in shape and<br />
colour, matching the design of your vehicle.<br />
Fully automatic: lift system EXEO II<br />
The elegant lift system EXEO II with its ergonomical hand rails<br />
is even more elegant than its predecessor. It works completely<br />
automatically and is also controlled via remote control. Fast<br />
and simple installation is possible through the integration of all<br />
the drive units in the lift.<br />
<strong>Sp</strong>ecial features of EXEO II:<br />
• Bridge plate and hand rails work<br />
by way of kinematics<br />
• High level of maintainability<br />
• Individual lifting heights up to 1110 mm possible<br />
• Easy installation in the vehicle<br />
Weight: approx. 250 kg<br />
Load capacity: min. 300 kg<br />
Platform size: 1230 x 830 mm<br />
Acceleration when raising and lowering: < 0.2g<br />
New: electrical ramp SKADI ®<br />
With the newly developed SKADI ® ramp, it is even easier for<br />
transportation companies to retrofit their vehicles and service<br />
them if needed. Many ideas and customer requirements have<br />
been incorporated into the development of this new ramp<br />
technology. Designed as a plug and play ramp, this enables the<br />
new SKADI ® to be installed quickly and easily in many types of<br />
vehicles.<br />
What makes our SKADI ® unique is the particularly simple<br />
assembly and the access to the main components. The overall<br />
system is completely preassembled in its own box, control unit<br />
included. This can either be installed inside or attached to the<br />
vehicle as a substructure. After assembly, the ramp system only<br />
needs to be supplied with electricity through a plug. And if servicing<br />
is necessary, both the tread plate and the drive can be dismantled<br />
or exchanged completely without any t<strong>oo</strong>ls. All this can be done<br />
in a few minutes so that there is almost no downtime.<br />
Capacity: 350 kg<br />
Slip-resistant surface coating<br />
Running in and running out time: 7 seconds<br />
Designed according to EC 2001/85 and DIN 32985<br />
Assembly size inside: L 1390 mm x W 1055 mm x H 77 mm<br />
Assembly size as substructure:<br />
L 1437 mm x W 1055 mm x H 67.5 mm<br />
24 25