Tower and Rack UPSs from Masterguard
Tower and Rack UPSs from Masterguard
Tower and Rack UPSs from Masterguard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
System Configurator <strong>and</strong> Order Information Guide<br />
<strong>Tower</strong> <strong>and</strong> <strong>Rack</strong> <strong>UPSs</strong> <strong>from</strong> <strong>Masterguard</strong> Date of issue 28.04.2008<br />
E<br />
PDU1<br />
For better serviceability PDU 1 <strong>and</strong> PDU2 offers a Bypass switch to disconnect UPS<br />
<strong>from</strong> mains <strong>and</strong> all load will be connected to mains directly. This allows to run load<br />
while UPS is maintained.<br />
D:UPS-PDU1<br />
UPS PDU1 3xC32A-2xC16A-2xIEC16A<br />
to extend the sockets of a 6kVA or 10kVA rack UPS<br />
Is connected to the 1-phase permanent connection<br />
of the UPS by an electrician.<br />
Output side, 1-phase<br />
3x IEC309 CEE blue (32A)<br />
2x IEC309 CEE blue (16A)<br />
3x IEC320 C19 (16A)<br />
Occupies 4U in the rack<br />
Max. 1x per 6 kVA rack UPS (D:UPS-R6-PV1)<br />
Max. 1x per 10 kVA rack UPS (D:UPS-R10-PV1)<br />
PDU2<br />
D:UPS-PDU2<br />
UPS PDU1 3xC32A-2xC16A-2xIEC16A<br />
to extend the sockets of a 6kVA or 10kVA rack UPS<br />
<strong>and</strong> parallel connection of two 6kVA or 10kVA rack <strong>UPSs</strong><br />
Is connected to the 1-phase permanent connection<br />
of both <strong>UPSs</strong> by an electrician.<br />
Output side, 1-phase<br />
3x IEC309 CEE blue (32A)<br />
2x IEC309 CEE blue (16A)<br />
3x IEC320 C19 (16A)<br />
Occupies 4U in the rack<br />
Max. 1x per 6 kVA rack UPS (D:UPS-R6-PV1)<br />
Max. 1x per two 10 kVA rack <strong>UPSs</strong> (D:UPS-R10-PV1)<br />
Operation only permitted with two connected <strong>UPSs</strong><br />
PDU 1 <strong>and</strong> 2 front view<br />
PDU 1 is mounted directly above the UPS in a <strong>Rack</strong><br />
Preassembled, 3-wire cable for permanent connection of<br />
PDU 1 <strong>and</strong> 2 is already conneccted at the PDU side.<br />
2 cables for PDU 1 <strong>and</strong> 4 for PDU2<br />
Extension of the UPS power to 12kVA / 20kVA by<br />
parallel connection of two 6kVA or 10kVA <strong>UPSs</strong><br />
LAN adapter always required for each UPS<br />
License cluster software (D:UPSSW-HA-CLUSTER)<br />
License enterprise software (D:UPSSW-HA-ENTERPR)<br />
is also required<br />
PDU 2 is mounted always between both <strong>UPSs</strong> in a <strong>Rack</strong><br />
whereas at the second arangement the Battery Pack<br />
is mounted above the UPS in a <strong>Rack</strong>. Refer to the drawings<br />
Additionally without service bypass<br />
a 50 A PDU is also available.<br />
Note: cannot be ordered together with<br />
a PRIMEPOWER PRIMECENTER <strong>Rack</strong><br />
Can be used only for:<br />
6kVA <strong>Rack</strong> D:UPS-R6-PV1<br />
10kVA <strong>Rack</strong> D:UPS-R10-PV1<br />
10kVA <strong>Tower</strong> D:UPS31-T10-PV1<br />
S26361-F2262-E500<br />
UPS PDU 50A 2U,6x16A+4x10A IEC320<br />
Power distribution unit for UPS hard wire output<br />
For APC Online UPS <strong>and</strong> Runtime expansion modules<br />
occupies 2U in racks<br />
S26361-F2262-L500<br />
UPS PDU 50A 2U,6x16A+4x10A IEC320<br />
Loose delivery<br />
Conection at customer side has to<br />
be done by an electrician.<br />
D:GPRAC-ZB31<br />
Dummy Panel for 19inch rack, 2U<br />
D:GPRAC-ZB5212<br />
Bracket up to 100 kg<br />
F<br />
Fujitsu Siemens Computers Enterprise Products - PRIMEPOWER / PRIMERGY Servers 7 of 12
Change language