08.01.2015 Views

ESTIA QUICK REFERENCE GUIDE.pdf

ESTIA QUICK REFERENCE GUIDE.pdf

ESTIA QUICK REFERENCE GUIDE.pdf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Display Explanation<br />

Quick Reference Guide - Page 21<br />

18: ZONE1, ZONE2 20: HOT WATER<br />

Display Description Display Description<br />

Lights when floor heater or radiator<br />

is connected (when the system has<br />

floor heater or radiator).<br />

ZONE1 selected for Temperature<br />

to be changed.<br />

Lights when system configured to<br />

have 2 zones.<br />

Lights when hot water supply system is<br />

connected (when the system has hot<br />

water supply).<br />

ZONE2 selected for Temperature<br />

to be changed.<br />

HOT WATER selected for Temperature<br />

to be changed.<br />

Lights during heating or cooling<br />

operation using the heat pump.<br />

Lights when hot water supply operation<br />

is performed by heat pump.<br />

Lights when the internal heater is<br />

energized during heating<br />

operation.<br />

Lights when the internal heater is<br />

energized during hot water supply<br />

operation.<br />

Lights when heating is selected.<br />

Lights during hot water supply operation.<br />

Lights when cooling is selected.<br />

Lights while hot water boost is activated.<br />

Lights when the FROST<br />

PROTECTION button is pressed<br />

and goes out when the button is<br />

pressed again.<br />

Lights when the ANTI BACTERIA button<br />

is pressed and goes out when the button<br />

is pressed again.<br />

Lights when Auto operation is<br />

selected.<br />

Lights when unit enters the data set<br />

mode.<br />

°C<br />

Displays heating/cooling set<br />

temperature. (Heating: 20 to 55°C,<br />

factory setting: Auto, cooling: 10 to<br />

30°C) Goes out when Auto<br />

operation is selected.<br />

Lights when the set temperature or<br />

sensor's water temperature is<br />

displayed with the 7-segment<br />

indicator.<br />

°C<br />

Displays hot water set temperature.<br />

(40 to 80°C, factory setting: 65°C)<br />

Lights when the set temperature or<br />

sensor's water temperature is displayed<br />

with the 7-segment indicator.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!