HP StorageWorks Enterprise Backup Solution with HP Data ...

12 Introduction
Assume there are two servers named samick and pure that both have connections to a shared tape drive
as shown in Figure 1. The direct path from pure to the tape drive shows the most efficient route, and the
indirect route through samick to the tape drive should only be used if the direct path becomes unavailable.
Figure 1 Example network
Each server is recognized by the tape devices when Group by Devices is selected (Figure 2) in the wizard.
When Autoconfiguration is performed, the option Automatically configure MultiPath devices is checked by
default.
Figure 2 Device Autoconfiguration Wizard - Devices screen