GEA Elite-Geko - Aspectenvironmental.com
GEA Elite-Geko - Aspectenvironmental.com
GEA Elite-Geko - Aspectenvironmental.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Unit Description<br />
<strong>GEA</strong> <strong>Elite</strong>-<strong>Geko</strong><br />
Heat exchanger<br />
for warm or chilled water<br />
Heat exchanger<br />
for warm and chilled water (4-pipe system)<br />
Copper pipes with drawn<br />
aluminium fins<br />
max. operating pressure 16 bar<br />
water as cooling medium<br />
50% glycol rate<br />
water as heating medium<br />
maximum inlet<br />
temperature 90 °C<br />
supplied with ½" connection,<br />
internal thread, air vent and drain<br />
Fig. 6<br />
Filter element<br />
Synthetic, washable filter<br />
medium, easy replacement,<br />
filter grade G1 (EN 779)<br />
Fig. 7<br />
Centrifugal fan 230 V ~ 50 Hz<br />
Single<br />
Tandem<br />
Centrifugal fan with low noise<br />
sleeve bearings, type and<br />
number of fans depend on unit<br />
size and selection, protection<br />
type IP32, insulation class B<br />
Fig. 8<br />
Lateral wall condensate tray<br />
Lateral ceiling condensate tray<br />
For collecting entire condensate<br />
of heat exchanger and valve<br />
piping, for condensate removal<br />
without pressure, made of plastic<br />
Fig. 9<br />
PR-2009-0103-GB • Subject to modifications • Status 08/2009 7