11.01.2015 Views

Maya Wardrobe - Mamas & Papas

Maya Wardrobe - Mamas & Papas

Maya Wardrobe - Mamas & Papas

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

instructions

maya wardrobe

FR051W:V1/09/08

© Mamas & Papas (Holdings) Ltd. 2008

Important:

Please read these

instructions

carefully before

starting to assemble

your product.

Important: the

assembly of this

product may

require two

people.

Maya Wardrobe V1.indd 1 1/12/08 09:34:46


Before assembling your product...

MaYA Wardrobe

Do not discard any packaging until you are certain you have all the correct components and fittings.

If any items are damaged or missing, please contact your retailer or Mamas & Papas on +44 (0)845 268 2000.

Allow plenty of time and space when beginning the construction of your product.

4

Components

6

7

6

9

8

2

1

3

3

5

10

14

13

10

12

16

15

11

Item Name Part No. Qty.

1 Left side panel 0000---00000 1

2 Right side panel 0000---00000 1

3 Support rail 0000---00000 2

4 Top panel 0000---00000 1

5 Bottom shelf 0000---00000 1

6 Back panel 0000---00000 2

7 H section 0000---00000 1

8 Hanger rail 0000---00000 1

Item Name Part No. Qty.

9 Top shelf 0000---00000 1

10 Door 0000---00000 2

11 Handle 0000---00000 4

12 Left drawer side 0000---00000 1

13 Right drawer side 0000---00000 1

14 Drawer back panel 0000---00000 1

15 Drawer front panel 0000---00000 1

16 Drawer base 0000---00000 1

2

Maya Wardrobe V1.indd 2 1/12/08 09:34:47


a

Fittings list

x16 b

x16

Cam stud

c

x4

Dowel

d

x2

Shelf support screw

e

x27

Hanger rail bracket

f

x6

Small screw

g

x2

Hinge plate

h

x6

Wardrobe runner (left & right version)

I

x12

Euro screw

J

x2

Large cam

K

x30

Door stop

l

x4

Nail

m

x6

Shelf support insert

n

x8

Hinge arm

o

x4

Handle bolt

p

x4

Drawer assembly screw

q

x2

Small cam

r

x1

Drawer runner (left & right version)

s

x1

Drawer base support bracket

t

x4

Wall strap / washer

Feet

3

Maya Wardrobe V1.indd 3 1/12/08 09:34:49


1

Step 1

Insert eight cam studs (A) into the left

side panel (1) and the right side panel

(2).

Tighten the cam studs using a cross

head screwdriver as shown.

T

2

Insert the four feet (T) into the bottom

of the side panels as shown.

a

Step 2

Insert four dowels (B) into the top

edges of the left side panel (1) and

right side panel (2).

The dowels may require tapping in

with a small hammer.

2

1

b

4

Maya Wardrobe V1.indd 4 1/12/08 09:34:53


1

Step 3

Insert four shelf support screws (C)

into the left side panel (1) and the

right side panel (2).

Tighten the shelf support screws

using a cross head screwdriver as

shown.

2

C

1

Step 4

Attach two hanger rail brackets (D)

to the left side panel (1) and right

side panel (2). Secure the hanger rail

brackets in place using four small

screws (E).

Tighten the small screws using a

cross head screwdriver as shown.

2

D

E

5

Maya Wardrobe V1.indd 5 1/12/08 09:34:58


1

Step 5

Attach the six hinge plates (F) to the

left side panel (1) and the right side

panel (2).

Secure the hinge plates by tightening

the screws using a cross head

screwdriver as shown.

2

F

1

Attach the wardrobe runners (G) to

the left side panel (1) and the right

side panel (2) using six euro screws

(H).

2

Please use

this hole

first

Step 6

Tighten the euro screws using a

cross head screwdriver as shown.

Please ensure you insert the

first screw for each runner in the

highlighted hole as shown on the

diagram. Once the first screw is

inserted, the holes on the runner and

the holes in the dresser sides will

align correctly.

Please use

this hole

first

G

H

6

Maya Wardrobe V1.indd 6 1/12/08 09:35:05


1

I

Step 7

Insert four large cams (I) into the left

side panel (1) and right side panel

(2).

Please ensure that the arrow on the

top of the cam is pointing towards

the hole on the adjacent edge of the

panel.

2

Insert four dowels (B) into the ends

of the support rails (3).

3

The dowels may require tapping in

with a small hammer.

3

Step 8

Insert four large cams (I) into the

support rails (3).

B

3

I

Please ensure that the arrow on the

top of the cam is pointing towards

the hole in the adjacent edge of the

panel.

3

7

Maya Wardrobe V1.indd 7 1/12/08 09:35:09


4

Step 9

Insert four cam studs (A) into the top

panel (4).

Tighten the cam studs using a cross

head screwdriver.

a

4

Step 10

Attach one door stop (J) to the top

panel (4) using two small screws (E).

Tighten the small screws using a

cross head screwdriver.

J

E

8

Maya Wardrobe V1.indd 8 1/12/08 09:35:12


I

Step 11

Insert four large cams (I) into the

bottom shelf (5).

Please ensure that the arrow on the

top of the cam is pointing towards

the hole in the adjacent edge of the

panel.

5

5

Step 12

Flip the bottom shelf (5) over and

attach one door stop (J) using two

small screws (E).

Tighten the small screws using a

cross head screwdriver.

J

E

9

Maya Wardrobe V1.indd 9 1/12/08 09:35:13


5

B

Step 13

Insert four dowels (B) into the ends

of the bottom shelf (5).

The dowels may require tapping in

with a small hammer.

3

3

1

Step 14

Attach the two support rails (3) to the

left side panel (1) ensuring that the

cams are facing the bottom of the left

side panel.

Lock the two cams by using a flat

head screwdriver and turning them

clockwise.

10

Maya Wardrobe V1.indd 10 1/12/08 09:35:15


5

1

Step 15 1

Attach the bottom shelf (5) to the left

side panel (1) ensuring that the cams

are facing the bottom of the left side

panel.

Lock the two cams by using a flat

head screwdriver and turning them

clockwise.

Step 16 2

Turn the assembled sections over so

than the hinge plates are closest to

the floor.

11

Maya Wardrobe V1.indd 11 1/12/08 09:35:17


2

Step 17 1

Attach the right side panel (2) to the

assembled sections.

Lock the four cams by using a flat

head screwdriver and turning them

clockwise.

4

Step 18 2

Attach the top panel (4) to the

assembled sections ensuring that the

door stop is closest to the floor.

Lock the four cams using a flat

head screwdriver and turning them

clockwise.

12

Maya Wardrobe V1.indd 12 1/12/08 09:35:20


Lower the back panels (6) onto the

back of the assembled sections and

slide the H section (7) between the

back panels.

7

6

6

Step 19 1

Secure the back panels to the

assembled sections using the nails

(K). Tap the nails into place using a

small hammer.

Please ensure that the nails are

aligned correctly before tapping them

through the back panel to reduce

the risk of nails protruding into the

wardrobe.

K

Step 20 2

With the help of another person,

stand the wardrobe up.

13

Maya Wardrobe V1.indd 13 1/12/08 09:35:23


Step 21 1

Insert the hanger rail (8) into the

hanger rail brackets.

8

9

Step 22 2

Insert four shelf support inserts (L)

into the top shelf (9).

Please ensure that the arrow on the

top of the shelf support insert as

pointing to the adjacent edge of the

shelf.

L

14

Maya Wardrobe V1.indd 14 1/12/08 09:35:25


Step 23 1

Insert the top shelf (9) into the

wardrobe.

please ensure that the shelf support

screws are fully inserted into the

shelf support inserts.

9

10

Step 24 2

Attach six hinge arms (M) onto the

doors (10) using twelve small screws

(E).

Tighten the small screws using a

cross head screwdriver.

10

E

M

15

Maya Wardrobe V1.indd 15 1/12/08 09:35:29


10

Step 25 1

You may require the help of another

person to complete this step.

Attach the doors (10) to the wardrobe

by sliding the hinge arms (M) onto

the hinge plates (F) then tightening

the screw in the middle of the hinge

plate with a cross head screwdriver.

F

10

M

Close the doors to see if any

adjustment is needed.

A

Step 26 2

Adjustment of the vertical gap

Turn screw A clockwise to decrease

the vertical gap between the door

and the side panels.

Turn screw A anti-clockwise to

increase the vertical gap between the

door and the side panels.

Adjustment of the horizontal gap

To lift the doors, loosen screws B on

all three door hinges and slide the

door up, then tighten the screws up.

To lower the doors, loosen screws B

on all three door hinges and slide the

door down, then tighten the screws

up.

b

b

16

Maya Wardrobe V1.indd 16 1/12/08 09:35:32


11

Step 27 1

Attach one door handle (11) to each

door using two handle bolts (N) for

each handle.

Tighten the handle bolts using a

cross head screwdriver.

11

N

14

13

Step 28 2

Attach the left drawer side (12) and

the right drawer side (13) to the

drawer back panel (14) using four

drawer assembly screws (O).

Tighten the drawer assembly screws

using a cross head screwdriver.

12

O

17

Maya Wardrobe V1.indd 17 1/12/08 09:35:35


Step 29 1

Insert four dowels (B) into the ends

of the drawer side panels.

The dowels may require tapping in

with a small hammer.

B

Step 30 2

Insert four small cams (P) into the

drawer side panels.

Please ensure that the arrow on the

top of the cam is pointing towards

the hole in the adjacent edge of the

panel.

p

18

Maya Wardrobe V1.indd 18 1/12/08 09:35:37


15

Step 31 1

Insert four cam studs (A) into the

drawer front panel (15).

Tighten the cam studs using a cross

head screwdriver.

A

Step 32 2

Slide the drawer base (16) into the

assembled drawer sections.

16

19

Maya Wardrobe V1.indd 19 1/12/08 09:35:38


Step 33 1

Attach the drawer front panel (15) to

the assembled drawer sections.

Lock the four small cams by using

a flat head screwdriver and turning

them clockwise.

15

Step 34 2

Attach two handles (11) to the front

of the drawer using four handle bolts

(N).

Tighten the handle bolts using a

cross handle screwdriver.

11

11

n

20

Maya Wardrobe V1.indd 20 1/12/08 09:35:40


Step 35 1

Attach the drawer runners (Q) to the

bottom of the drawer side panels.

Secure the drawer runners using six

small screws (E) and tightening using

a cross head screwdriver.

q

e

Step 36 2

Flip the drawer over and position the

drawer base support bracket (R) in

the centre of the drawer back panel

as shown.

Secure the drawer base support

bracket by tightening the screw using

a cross head screwdriver.

R

21

Maya Wardrobe V1.indd 21 1/12/08 09:35:43


Step 37

Insert the completed drawer into the

wardrobe by holding it at an angle

and ensuring that the wheels on the

drawer runners locate in the track of

the wardrobe runners.

The drawer should slide freely in and

out on the runners.

Attach the wall strap (S) to the top

panel and the back of the wardrobe

using a small screw (E) as shown.

Secure the strap to the wardrobe

using the supplied washer and screw

as shown.

Step 38

Please see the Wall Strap

Information section for further

details.

The Maya Wardrobe is now

complete.

Please ensure that you check

that all fittings are tightened and

secured properly before use.

s

E

22

Maya Wardrobe V1.indd 22 1/12/08 09:35:44


INSTRUCTIONS FOR SAFE USE & maintenance

• Warning: Never leave your child unattended. The safety of your child is your

responsibility.

• Before use, ensure the product is on a stable, level surface.

• Do not allow children to climb on the Product.

• Never use the product if any parts are broken or missing.

• Wood is a natural product and as such it can be subject to occasional variations in colour. This is not a

defect and will not detract from the strength or performance of the product.

• Never pivot or drag the product on its feet, the product must always be lifted by at least two people

when moved.

• Do not place the product in the near vicinity of open fires or other sources of strong heat, such as

electric or gas fires.

• Always leave the product clean and dry. Wipe away any spillage straight away. The product can be

cleaned with a damp cloth. Never use abrasive, bleach or strong detergents.

• Check regularly that all fittings and screws are correctly tightened and are not damaged.

Wall strap information

The wall strap is only intended to be used with the Mamas and Papas product that it is supplied with.

Never attempt to modify or change the wall attachment strap in any way. Never use any other fittings for

attaching the strap to your furniture than those supplied.

Never use the screw provided to attach the strap to the wall. No wall attachment fittings are supplied. This

is because the type of fittings required to attach the strap to the chosen wall is determined by the walls

composition. If you are in any doubt about the correct type of fittings to use, consult a professional before

attempting to attach the strap to the wall.

The wall strap must not be used to replace any other fitting supplied with your piece of furniture.

Furniture falling over is generally due to the surface the furniture is placed on. A warped floor or wall-towall

carpeting will enable the furniture to rock, so greatly increasing the potential for the furniture to fall.

If the furniture is placed on a flat level wood or tiled floor the risk is reduced, but we still recommend the

wall strap is fitted.

Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in these instructions. We

reserve the right to change the specifications of any product without prior notice.

After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please contact

Customer Care on: +44 (0)845 268 2000, or e-mail us at: customer.care@mamasandpapas.com. Visit our website

at www.mamasandpapas.com for the latest product information.

23

Maya Wardrobe V1.indd 23 1/12/08 09:35:44


www.mamasandpapas.com

Mamas & Papas

Colne Bridge Road

Huddersfield, HD5 0RH, UK

customer care helpline: +44(0)845 268 2000

customer care email: customer.care@mamasandpapas.com

Maya Wardrobe V1.indd 24 1/12/08 09:35:44

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!