Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Accessories<br />
Cover and Protection Kits<br />
Protective Bellows<br />
Unit type p/n B B2 H H1 H2 H4<br />
2HBE10 BEL-2H-10 103 81 26 11 10 0<br />
2HBE20 BEL-2H-20 199 167 48 30 15 5<br />
Protective Shrouds<br />
Unit type<br />
2HBE10 see ordering key of the unit for order<br />
2HBE20 see ordering key of the unit for order<br />
Shaft Protection Cover<br />
www.danahermotion.com<br />
<strong>Linear</strong> <strong>Units</strong><br />
The protective bellows protect the entire unit from dust<br />
and dirt. Bellows option reduces the available stroke of<br />
the unit by about 28 %. Bellows can be ordered mounted<br />
from factory and in that case this is stated in the ordering<br />
key of the unit. It can also be ordered separately to be<br />
fitted by the customer. In this case the part number and<br />
the length of the bellows must be stated. For 2HBE10 the<br />
correct bellows length is max. stroke of the unit (Smax) +<br />
100 while it for 2HBE20 is the max. stroke (Smax) + 200.<br />
The protective shrouds are made of metal and protect<br />
the drive mechanism of the unit from dust and dirt but<br />
leaves the guides unprotected. Shrouds do not reduce<br />
the stroke of the unit but they will add 4 mm to the width<br />
of the unit. Shrouds are ordered mounted from factory<br />
and is stated in the ordering key of the unit.<br />
Unit type p/n A B<br />
M50 D312 201 126 35<br />
M55 D312 201 151 35<br />
M75 D700 178 198 45<br />
M100 D700 178 202 45<br />
The shaft protection cover is used to cover shafts which is not being<br />
used. The cover is fitted by the customer.<br />
145