Linear Units

Ordering Keys
Linear Units with Ball Screw Drive and Slide Guides
M55, M75, M100
Your Code
www.danahermotion.com
1 2 3 4 5 6 7
Example MG07 K057 C 10 S 05 S1
1. Type of unit
MG06 = M55 unit
MG07 = M75 unit
MG10 = M100 unit
2. Ball screw type, lead and tolerance class 2
C057 = composite nut, 5 mm, T7
K057 = ball nut, 5 mm, T7
KU57 = ball nut, 5,08 mm, T7
C109 = composite nut, 10 mm, T9
K107 = ball nut, 10 mm, T7
K109 = ball nut, 10 mm, T9
K129 = ball nut, 12,7 mm, T9
K207 = ball nut, 20 mm, T7
C257 = composite nut, 25 mm, T7
K257 = ball nut, 25 mm, T7
K259 = ball nut, 25 mm, T9
C329 = composite nut, 32 mm, T9
. Type of carriages
A = single standard carriage
C = double standard carriages
4. Distance between carriages (Lc)
00 = for all single standard carriage units
• • = distance in cm between carriages
5. Screw supports
X = no screw supports
S = single screw supports
D = double screw supports
6. Ordering length (L order)
• • • = distance in cm
7. Protection option 1
S1 = S1 wash down protection
Linear Units
1 Leave position blank if no additional protec-
tion is required.
2 See table below for available combinations of
units and ball screw type, lead and tolerance.
Ball
screw
type
Type of unit
M55 M75 M100
C057 x
K057 x x x
KU57 x
C109 x
K107 x x
K109 x
K129 x
K207 x x
C257 x
K257 x
K259 x
C329 x
207