You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories<br />
Motors, Gears and Transmission Kits<br />
Micron DT, DTR Planetary Gears, how to order<br />
1. Size of planetary gear<br />
DT60<br />
DT90<br />
DT115<br />
2. Type of gear<br />
-SS<br />
-DS<br />
. Mounting side of the unit<br />
Left<br />
Right<br />
4. Gear ratio<br />
3:1 (only for -SS models)<br />
5:1 (only for -SS models)<br />
10:1 (only for -SS models)<br />
15:1 (only for -DS models)<br />
25:1 (only for -DS models)<br />
30:1 (only for -DS models)<br />
50:1 (only for -DS models)<br />
100:1 (only for -DS models)<br />
5. Motor<br />
Specify your choice of motor.<br />
www.danahermotion.com<br />
1. Type and size of planetary gear<br />
DTR60<br />
DTR90<br />
DTR115<br />
2. Type of gear<br />
-SS<br />
-DS<br />
. Mounting position of the gear<br />
Position 1<br />
Position 2<br />
Position 3<br />
Position 4<br />
4. Mounting side of the unitl<br />
Left<br />
Right<br />
5. Gear ratio<br />
5:1 (only for -SS models)<br />
6:1 (only for -SS models)<br />
9:1 (only for -SS models)<br />
10:1 (only for -SS models)<br />
12:1 (only for -SS models)<br />
15:1 (only for -SS models)<br />
20:1 (only for -SS models)<br />
25:1 (only for -SS models)<br />
30:1 (only for -SS models)<br />
40:1 (only for -SS models)<br />
50:1 (only for -SS models)<br />
60:1 (only for -DS models)<br />
75:1 (only for -DS models)<br />
90:1 (only for -DS models)<br />
100:1 (only for -DS models)<br />
120:1 (only for -DS models)<br />
125:1 (only for -DS models)<br />
150:1 (only for -DS models)<br />
200:1 (only for -DS models)<br />
250:1 (only for -DS models)<br />
300:1 (only for -DS models)<br />
400:1 (only for -DS models)<br />
500:1 (only for -DS models)<br />
6. Motor<br />
Specify your choice of motor.<br />
<strong>Linear</strong> <strong>Units</strong><br />
When ordering a DT or DTR planetary gear you need to state the size and type of gear, which side of the unit the gear shall be installed, the gear<br />
ratio and which motor that you wish to use. For DTR you also must state the prefered mounting position of the gear. With this information we can<br />
check if your choice of motor is possible or not and give you the correct ordering code for the gear.<br />
Micron DT, ordering data Micron DTR, ordering data<br />
165