Linear Units

Ordering Keys
Linear Units with Ball Screw Drive and Slide Guides
M75D, M100D
Your Code
1 2 3 4 5 6 7
Example MG10 D109 A 00 X 55
1. Type of unit
MG07 = M75D unit
MG10 = M100D unit
2. Ball screw type, lead and tolerance class 2
D057 = double ball nut, 5 mm, T7
D107 = double ball nut, 10 mm, T7
D109 = double ball nut, 10 mm, T9
D129 = double ball nut, 12,7 mm, T9
D207 = double ball nut, 20 mm, T7
D257 = double ball nut, 25 mm, T7
. Type of carriages
A = single standard carriage
C = double standard carriages
4. Distance between carriages (Lc)
00 = for all single standard carriage units
• • = distance in cm between carriages
5. Screw supports
X = no screw supports
S = single screw supports
D = double screw supports
6. Ordering length (L order)
• • • = distance in cm
7. Protection option 1
S1 = S1 wash down protection
1 Leave position blank if no protection option
required.
2 See below table for available combinations of
units and ball screw type, lead and tolerance.
Ball
screw
type
Type of unit
M75 M100
D057 x x
D107 x
D109 x
D129 x
D207 x
D257 x
208 www.danahermotion.com