Instrumentation & Controls - Siemens

TXP Process Control System
TXP Process Control System
Control Logic Maintenance
TXP-CLM
1 week - $2,650.00
March 20-24, 2006
Prerequisites
A basic background in logic control and digital
computer techniques. Prior completion of Control
Logic Configuration (TXP-CLC) is recommended.
Description
This course for maintenance personnel describes
the various components in the TXP system and
maintaining plant equipment using the engineering
workstation. Students will make changes to the
input/output configuration adding new I/O points, and
troubleshoot the logic and code. Students will learn to
perform dynamic function changes as well as add and
remove simulations.
Objectives
Upon successful completion of this course, the student
has been trained to:
• Troubleshoot TXP logic using the engineering
workstation
• Initialize standard settings on communication and
I/O cards
• Distinguish between hardware and software
problems
• Explain the difference between dynamic parameter
changes and online and offline code transfers
Course contents
A. TXP overview
B. Logic development and maintenance
1. Adding hardware modules and I/O points
2. Dynamic parameter changes, dynamic
function plans
3. Applying simulations
4. Initialization of automation processor by
programming an I/O flash card
5. Communication processor card
6. Code generation and transfer to applicable
TXP computers
C. Program and initialize an optical switch module
D. Troubleshooting
1. Hardware problem solving
2. Software problem solving
E. Use of SCO UNIX commands to verify status of CPU
16
www.sea.siemens.com/sitrain