Instrumentation & Controls - Siemens
Instrumentation & Controls - Siemens
Instrumentation & Controls - Siemens
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TXP Process Control System<br />
Prerequisites<br />
A basic background in modulating and logic<br />
control and in digital computer techniques and<br />
prior experience with DCS control systems is<br />
desirable. Prior completion of Hardware<br />
Configuration/Maintenance (TXP-HW) and<br />
Control Logic Configuration (TXP-CLC) is highly<br />
recommended.<br />
Description<br />
This course is designed for the technician<br />
responsible for the software maintenance of a TXP<br />
system. It describes the general use and functions<br />
of the various components in the TXP governor<br />
system SIMADYN®. Emphasis will be placed on<br />
the governor system hardware layout, drawing<br />
conventions used, the STRUC G programming<br />
language, and troubleshooting techniques.<br />
Course contents<br />
A. Closed-loop control concepts<br />
B. Governor functional description<br />
1. Speed, load, and outlet temperature<br />
control (OTC) controllers<br />
C. Governor system hardware overview<br />
1. General cabinet layout for both gas<br />
turbines that are marketed by <strong>Siemens</strong><br />
2. Signal converter overview/description<br />
D. Program development and modification<br />
1. Hardware drawing overview/description<br />
2. Governor system software drawing<br />
overview/description<br />
3. Block diagram functional sheets<br />
4. STRUC G software<br />
E. Troubleshooting<br />
1. Hardware and software faults<br />
2. IBS program on commissioning<br />
and diagnostic tool PG740<br />
F. Plant bus communications with automation<br />
system<br />
1. NML software on commissioning and<br />
diagnostic tool PG740<br />
TXP Process Control System<br />
Governor Familiarity Course<br />
TXP-GOV<br />
1 week - $2,650.00<br />
May 22-26, 2006<br />
October 23-27, 2006<br />
Objectives<br />
Upon successful completion of this<br />
course, the student has been<br />
trained to:<br />
• Understand basic closed-loop<br />
control concepts<br />
• Understand the basics of speed<br />
control, load control, and OTC<br />
control concepts<br />
• Identify individual hardware<br />
components in the governor<br />
cabinet<br />
• Read and understand hardware<br />
drawings<br />
• Read and understand software<br />
drawings<br />
• Troubleshoot common hardware<br />
and software problems using a<br />
commissioning and diagnostic<br />
tool PG740 and the IBS software<br />
program<br />
• Understand communication<br />
tasks between the governor<br />
system and automation system<br />
www.sea.siemens.com/sitrain<br />
23