Chemical Reference Standards AccuStandard®

Physical Properties
ASTM D-1319
Olefin FIA Calibration Curve
FIA-CAL-SET
Calibration Standards by Fluorescent Indicator Adsorption FIA
$ 330 / Set of 7 x 1 mL
Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7
Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %
Total Olefins 2.0 4.0 5.0 6.0 8.0 10.0 12.0
Total Paraffins 57.0 55.0 52.0 51.0 45.0 45.0 40.0
Total Aromatics 23.0 24.0 25.0 26.0 29.0 28.0 30.0
Total Oxygenate 18.0 17.0 18.0 17.0 18.0 17.0 18.0
Originally
designed for
D-1319-99
D-1319
Meets
EPA Guidelines for
RFG
Analysis
FIA Paraffin Standard
FIA-PAR
FIA-PAR-5ML
Vol. %
n-Pentane 8
n-Hexane 9
Cyclohexane 15
n-Heptane 14
$ 35 / 1 x 1 mL
SAVE 35% $ 115 / 1 x 5 mL
8 comps.
Vol. %
2,3-Dimethylpentane 14
Isooctane 16
n-Octane 14
n-Decane 7
FIA Olefin Standard
FIA-OLE
FIA-OLE-5ML
Vol. %
1-Pentene 33.3
2,3-Dimethyl-2-butene 33.3
$ 45 / 1 x 1 mL
SAVE 40% $ 135 / 1 x 5 mL
3 comps.
Vol. %
1-Heptene 33.3
FIA Aromatic Standard
FIA-ARO
FIA-ARO-5ML
mix ratio
Benzene 4
Toluene 32
Ethylbenzene 8
p-Xylene 8
o-Xylene 8
$ 35 / 1 x 1 mL
SAVE 33% $ 115 / 1 x 5 mL
10 comps.
mix ratio
m-Xylene 16
1,2,4-Trimethylbenzene 8
1,3,5-Trimethylbenzene 8
1,2,4,5-Tetramethylbenzene 4
Naphthalene 4
ASTM D-1744, E-1064, D-4377
D-4928, D-6304
Water in Liquid Petroleum Products by
Karl Fischer
Standards are available for coulometric Karl Fischer titrations and are packaged in 2 mL, 5 mL, and 20 mL ampules in
sets of 5 and 10. The following concentrations are available:
Cat. No. Description Price / Unit
KF-0.6X-5ML-VAP Water content 60 µg/g $ 65 / 10 x 5 mL
KF-1X-2ML-VAP Water content 100 µg/g 40 / 10 x 2 mL
KF-1X-5ML-VAP Water content 100 µg/g 45 / 10 x 5 mL
KF-1X-20ML-PAK Water content 100 µg/g 50 / 5 x 20 mL
KF-10X-2ML-VAP Water content 1000 µg/g 40 / 10 x 2 mL
KF-10X-5ML-VAP Water content 1000 µg/g 45 / 10 x 5 mL
KF-10X-20ML-PAK Water content 1000 µg/g 50 / 5 x 20 mL
KF-50X-2ML-VAP Water content 5000 µg/g 40 / 10 x 2 mL
KF-50X-5ML-VAP Water content 5000 µg/g 45 / 10 x 5 mL
KF-50X-20ML-PAK Water content 5000 µg/g 50 / 5 x 20 mL
Value Added Paks (Cat. No.’s
ending in -VAP) provide
multiple single units packaged
together for both greater
stability and cost savings.
ASTM Standards
ASTM D-2386
Freezing Point Calibration Standards
Cat. No. Nominal Freezing Point Price / Unit
ASTM-P-129-01 - 50 °C $ 110 / 250 mL
ASTM-P-129-02 - 45 °C 110 / 250 mL
Originally designed for
D-2386-97
ASTM D-2500
Cloud Point Calibration Standards
Cat. No. Cloud Point, Approx. Value Price / Unit
ASTM-P-131-01 + 5 °C $ 110 / 250 mL
ASTM-P-131-02 - 2 °C 110 / 250 mL
ASTM-P-131-03 - 10 °C 110 / 250 mL
ASTM-P-131-04 - 15 °C 110 / 250 mL
ASTM-P-131-05 - 20 °C 110 / 250 mL
Originally designed for
D-2500-00
For MSDSs visit our website at www.AccuStandard.com 147