Chemical Reference Standards AccuStandardÂ®

More documents

Recommendations

Info

Petrochemical ASTM Standards ASTM D-3120 & D-3246 Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry Sulfur Calibration Set D-3120-92-CAL-SET $ 75 / set of 8 x 1 mL In Isooctane Cat. No. Sulfur Conc. Sulfur Wt.% D-3120-BL Blank Blank D-3120-92-1X 1 µg/g 0.0001 D-3120-92-3X 3 µg/g 0.0003 D-3120-92-10X 10 µg/g 0.0010 D-3120-92-30X 30 µg/g 0.0030 D-3120-92-50X 50 µg/g 0.0050 D-3120-92-75X 75 µg/g 0.0075 D-3120-92-100X 100 µg/g 0.010 Technical Note Originally designed for D-3120-96 & D-3246-96 Well characterized di-n-butyl sulfide is used in a low sulfur Isooctane matrix for this calibration set. ASTM D-3237 Lead in Gasoline by AA Spectroscopy D-3237 Meets EPA Guidelines for RFG Analysis Lead Standard Calibration Curve Originally designed for D-3237-97 D-3237-CAL-SET $ 210 / 4 x 100 mL Set includes the following Catalog Numbers: Cat. No. Price / Unit Blank 1% Aliquot 336/MIBK D-3237-01 $ 20 / 100 mL 0.02 g Pb / gal ( 5.3 mg Pb/ L) D-3237-02 $ 80 / 100 mL in 1% Aliquat 336 / MIBK 0.05 g Pb / gal ( 13.2 mg Pb/ L) D-3237-03 $ 80 / 100 mL in 1% Aliquat 336 / MIBK 0.10 g Pb / gal ( 26.4 mg Pb/ L) D-3237-04 $ 80 / 100 mL in 1% Aliquat 336 / MIBK ASTM D-3246 Sulfure in Petroleum Gas by Oxidative Microcoulometry See Sulfur Section for certified sulfur calibration standards ASTM Standards ASTM D-3230 Salts in Crude Oil Mixed Salt Solution D-3230-89-1 $ 75 / 100 mL D-3230-89-5 $ 150 / 500 mL At stated conc. in Alcohol Solution (1-butanol:MeOH)(63:37) tr. H 2 O 3 comps. Calcium chloride Magnesium chloride 10 µg/mL 20 µg/mL Sodium chloride ASTM D-3231 Phosphorus in Gasoline D-3231 Meets EPA Guidelines for RFG Analysis Originally designed for D-3230-99 70 µg/mL Originally designed for D-3231-99 Element Quantity Cat. No. Price Matrix Conc. Phosphorus 100 mL ICP-41W-1 $ 34 H 2 O 1000 µg/mL Phosphorus 500 mL ICP-41W-5 $ 67 H 2 O 1000 µg/mL ASTM D-3340 Lithium & Na in Lubricating Greases by Flame Photometer AccuStandard AccuTrace brand AA standards are produced under our rigorous ISO 9001 quality system to exacting specifications. Each standard is prepared from high purity starting materials; deionized water and high purity acids. Every standard is instrumentally assayed to verify 1000 ppm concentration of the specified element. Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease of record keeping and availability at audits. Element Unit Cat. No. Price Matrix 1,000 µg/mL Lithium 100 mL AA30H-1 $ 12 HCl 500 mL AA30H-5 30 Sodium 100 mL AA54H-1 13 HCl 500 mL AA54H-5 33 Technical Note Originally designed for D-3340-98 For your convenience these elements are also available in HNO 3 . To order HNO 3 change the H to N in the Cat. No. ASTM D-3524 (Reapproved ‘99) Diesel Fuel Diluent in Used Diesel Engine Oils by GC D-3524 Calibration Curve D-3524-CAL-SET-5ML D-3524-CAL-SET-10ML Originally designed for D-3524-90 $ 150 / set of 6 x 5 mL $ 250 / set of 6 x 10 mL Analyte Standard 1 Standard 2 Standard 3 Standard 4 Standard 5 Standard 6 Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. % # 2 Diesel 10 7.5 5 2.5 1 0 30 W Motor oil 90 92.5 95 97.5 99 100 Internal Standard Solution D-3524-IS-10ML $ 25 / 1 x 10 mL D-3524-IS-10ML-PAK SAVE $ 100 / 5 x 10 mL At stated conc. in n-Heptane 2 comps. Wt./Wt. % n-Decane 1.0 n-Octadecane 0.2 Column Resolution Mix D-3524-CR $ 10 / 1 x 1 mL D-3524-CR-PAK SAVE $ 40 / 5 x 1 mL At stated conc. in n-Heptane 2 comps. Wt./Wt. % n-Hexadecane 1.0 n-Octadecane 1.0 Mid Level Daily QC Solution D-3524-QC-10ML $ 30 / 1 x 10 mL 2 comps. Wt./Wt. % # 2 Diesel 5.0 30 W Motor oil 95 ASTM D-3605 (Reapproved ‘95) Trace Metals in Gas Turbine Fuels by AA & Flame Emission Spectroscopy D-3605-91 Trace Metals Standard D-3605-91-1 At stated conc. in 1,2,3,4-Tetrahydronaphthalene Na (Sodium) Pb (Lead) 250 µg/mL 250 µg/mL Ca (Calcium) V (Vanadium) Originally designed for D-3605-91 $ 165 / 1 x 100 mL 4 comps. 250 µg/mL 250 µg/mL 148 AccuStandard’s Quality System is Certified to comply with the International ISO 9001:2000 Quality Standard
Petrochemical ASTM Standards ASTM D-3606 Benzene & Toluene in Finished Motor & Aviation Gasoline by GC D-3606 Meets EPA Guidelines for RFG Analysis Aromatics Quantitative Calibration Standard (without Internal Standards) D-3606-SET-25ML $ 800 / set of 7 x 25 mL Aromatics Quantitative Calibration Standard (with Internal Standard: MEK) D-3606/IS-SET D-3606/IS-SET-2ML D-3606/IS-SET-2ML-PAK $ 115 / set of 7 x 1 mL $ 190 / set of 7 x 2 mL $ 760 / 5 x (7 x 2) mL Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576 Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800 Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624 Methyl ethyl ketone (Internal Std.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 Gasoline Refinery Quality Control Standards Originally designed for D-3606-99 Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Benzene 0.06 - 5.0 5.00 2.50 1.25 0.67 0.33 0.12 0.06 Toluene 0.5 - 20 20.00 15.00 10.00 5.00 2.50 1.00 0.50 Isooctane 75.00 82.50 88.75 94.33 97.17 98.88 99.44 Daily Quality Control Standard (with Internal Standard: MEK) D-3606-QC/IS-10ML D-3606-QC/IS-10ML-PAK Each at stated quantities Compound Target Vol. % Benzene 0.6432 Toluene 4.8000 Isooctane 90.5568 Methyl ethyl ketone (ISTD) 4.0 Aromatics Quantitative Calibration Standard (w/ Internal Standard: sec Butanol) D-3606/IS2-SET D-3606/IS2-SET-PAK $ 75 / 1 x 10 mL $ 300 / 5 x 10 mL 4 comps. 100 Daily Quality Control Standard (without Internal Standard) D-3606-QC-25ML D-3606-QC-25ML-PAK Each at stated quantities $ 125 / 1 x 25 mL $ 600 / 5 x 25 mL 3 comps. $ 115 / set of 7 x 1 mL $ 500 / 5 x (7 x 1) mL Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576 Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800 Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624 sec Butanol (Internal Standard) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 Aromatics Quantitative Calibration Curve Compound Target Vol. % Benzene 0.67 Toluene 5.00 Isooctane 94.33 NEW D-3606/IS2-R1-SET $ 115 / set of 7 x 1 mL Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Benzene 0.06 - 5.0 5 4.2 3.4 2.6 1.7 0.9 0.1 Toluene 0.5 - 20 20 17 14 11 8 5 2 sec Butanol (ISTD) 4 4 4 4 4 4 4 Isooctane 75 78.8 82.6 86.4 90.3 94.1 97.9 100 Technical Note Due to changes in the possible use of other oxygenates like ethanol added to gasoline, AccuStandard formulated a new calibration curve using secbutanol as an Internal Standard. The use of this ISTD minimizes coelution caused by the oxygenate(s) and pre column - standard column configuration in the GC system. ASTM Standards Gasoline Refinery Quality Control Standards Daily Quality Control Standard (with Internal Standard: sec Butanol) D-3606-QC-IS2-25ML D-3606-QC-IS2-25ML-PAK Each at stated quantities Compound Target Vol. % Benzene 0.6432 Toluene 4.8000 Isooctane 90.5568 sec-Butanol (ISTD) 4.0 $ 125 / 1 x 25 mL $ 600 / 5 x 25 mL 4 comps. 100 Daily Quality Control Standard (without Internal Standard) D-3606-QC-25ML D-3606-QC-25ML-PAK Each at stated quantities Compound Target Vol. % Benzene 0.67 Toluene 5.00 Isooctane 94.33 $ 125 / 1 x 25 mL $ 600 / 5 x 25 mL 3 comps. 100 For MSDSs visit our website at www.AccuStandard.com 149
Page 1 and 2:
Chemical Reference Standards INTERN
Page 3 and 4:
PRINTED ON RECYCLED PAPER Table of
Page 5 and 6:
AccuStandard, At Your Service Inter
Page 7 and 8:
PCBs AccuStandard is known througho
Page 9 and 10:
PCB Congeners Individual PCB Congen
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
PCB Congeners EU Formulations PCB C
Page 19 and 20:
PCB Congeners Mixtures for Congener
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
PCB Congeners PCB Congener Calibrat
Page 27 and 28:
PCB Metabolites & Derivatives Indiv
Page 29 and 30:
Aroclors Individual Aroclors (in 1
Page 31 and 32:
Flame Retardants Individual PBDEs S
Page 33 and 34:
Flame Retardants Method 1614 Polybr
Page 35 and 36:
Flame Retardants Other Flame Retard
Page 37 and 38:
Dibenzofurans Individual Dibenzofur
Page 39 and 40:
PAHs & Derivatives Individual PAHs
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Nitroaromatics Individual Nitroarom
Page 47 and 48:
Aliphatic & Aromatic Amines & Deriv
Page 49 and 50:
Nitrogen Containing Compounds Nitro
Page 51 and 52:
Pesticides & Herbicides Pesticides,
Page 53 and 54:
Pesticides & Herbicides Pesticides
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Pesticides & Herbicides The followi
Page 89 and 90:
Pesticides & Herbicides Method 531
Page 91 and 92:
Volatiles Volatile Organic Compound
Page 93 and 94:
Volatiles Volatiles (in 1 mL of sol
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Volatiles Chlorinated Organic Volat
Page 101 and 102:
Volatiles USEPA Method 503.1 Purgea
Page 103 and 104: Volatiles USEPA Method 8010, 8010A
Page 105 and 106: Volatiles USEPA Method 8021B Purgea
Page 107 and 108: Volatiles USEPA Method 8240 & 8260
Page 109 and 110: Volatiles VOC Selected Target Compo
Page 111 and 112: Phenols & Derivatives Phenols & Der
Page 113 and 114: Phenols & Derivatives Method 8040A
Page 115 and 116: Alcohols Alcohols (in 1 mL of solve
Page 117 and 118: Aldehydes Method 554 Carbonyl Compo
Page 119 and 120: Ketones Ketones (in 1 mL of solvent
Page 121 and 122: Haloacetic Acids Haloacetic Acids (
Page 123 and 124: Refrigerants Refrigerants (CFCs) (i
Page 125 and 126: Fuel & Hydrocarbon Standards Fuels
Page 127 and 128: Fuel & Hydrocarbon Standards Gasoli
Page 129 and 130: Fuel & Hydrocarbon Standards Leakin
Page 131 and 132: Explosives Explosives (in 1 mL of s
Page 133 and 134: Allergens It has been estimated tha
Page 135 and 136: Allergens Allergens (in 1 mL of sol
Page 137 and 138: Allergens by Type COMPOUND CAS NO.
Page 139 and 140: Food Analysis Analytes for Food Ana
Page 141 and 142: Food Analysis ASTM Method D6042-92
Page 143 and 144: Food Analysis AOCS, Method Ce1-62 A
Page 145 and 146: Food Analysis Typically 98+% Pure,
Page 147 and 148: Perfluorooctanoic Miscellaneous & A
Page 149 and 150: Sulfur Please note that 4 ounces is
Page 151 and 152: Petrochemical The Petrochemical ind
Page 153: Physical Properties ASTM D-1319 Ole
Page 157 and 158: Petrochemical ASTM Standards ASTM D
Page 183 and 184: Petrochemical ASTM Standards Throug
Page 189 and 190: Inorganic Standards Single Element
Page 191 and 192: ICP NoHaz Size (No Hazardous shippi
Page 193 and 194: ICP NoHaz Size (No Hazardous shippi
Page 195 and 196: ICP ICP Multi-Element Standard Solu
Page 197 and 198: Plasma Emission / Mass Spectroscopy
Page 199 and 200: AA NoHaz Size (No Hazardous shippin
Page 201 and 202: Wear Metals These Standards were fo
Page 203 and 204: Ion Chromatography Ion Chrom - Anio
Page 205 and 206:
CAS Number Index CAS # PAGE CAS # P
Page 207 and 208:
CAS Number Index CAS # PAGE CAS # P
Page 209 and 210:
Catalog Number Index CAT .NO. PAGE
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 226 and 227:
Custom Quotation Request Form From:
Page 228:
Chemical Reference Standards INTERN
show all

Chemical Reference Standards AccuStandardÂ®

Create successful ePaper yourself

Delete template?

Save as template?