Chemical Reference Standards AccuStandard®

Petrochemical ASTM Standards
ASTM D-6443 Ca, Cl, Cu, Mg, P, S, Zn in Unused Lubricating Oils & Additives by
Wavelength Dispersive X-ray Fluorescence & Spectrometry
Lubricating Oil, Elements, WLXRF ASTM Method (Nominal Value) Wt.% listed below
ASTM-P-0117-SET
$ 2100 / 10 x 100 mL
Ca Cl Cu Mg P S Zn
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0117-01 0.020 0.030 0.010 0.200 0.250 1.000 0.020
ASTM-P-0117-02 0.020 0.020 0.050 0.200 0.020 0.020 0.250
ASTM-P-0117-03 0.020 0.200 0.010 0.040 0.250 0.150 0.250
ASTM-P-0117-04 0.020 0.200 0.050 0.040 0.020 1.000 0.020
ASTM-P-0117-05 0.400 0.020 0.010 0.040 0.020 1.000 0.250
ASTM-P-0117-06 0.400 0.020 0.050 0.040 0.250 0.020 0.020
ASTM-P-0117-07 0.400 0.200 0.010 0.200 0.020 0.020 0.050
ASTM-P-0117-08 0.400 0.200 0.050 0.200 0.250 1.000 0.250
ASTM-P-0117-09 0.200 0.100 0.025 0.080 0.150 0.500 0.100
ASTM-P-0117-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Originally designed for D-6443-99
ASTM D-6445 Sulfur in Gasoline by ED - XRF
See the Sulfur Standards Group listing in the Table of Contents for AccuStandard’s comprehensive
line of Certified Sulfur Calibration Standards.
ASTM D-6481 P, S, Ca and Zn in Lube Oils by ED-XRF
Lubricating Oil, Elements, EDXRF ASTM Method
(Nominal Value) Wt.% listed below
ASTM-P-0114-SET
$ 1900 / 17 x 100 mL
Originally designed for D-6481-99
ASTM Standards
Ca P S Zn
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0114-01 0.005 0.005 0.050 0.050
ASTM-P-0114-02 0.600 0.000 0.000 0.000
ASTM-P-0114-03 0.000 0.300 0.000 0.000
ASTM-P-0114-04 1.000 0.000 1.000 0.000
ASTM-P-0114-05 0.000 0.000 0.000 0.300
ASTM-P-0114-06 0.005 0.250 0.800 0.300
ASTM-P-0114-07 0.500 0.150 0.500 0.150
ASTM-P-0114-08 0.010 0.200 0.100 0.250
ASTM-P-0114-09 0.050 0.010 0.400 0.075
ASTM-P-0114-10 0.100 0.150 0.200 0.200
ASTM-P-0114-11 0.200 0.200 0.800 0.100
ASTM-P-0114-12 0.400 0.005 0.800 0.300
ASTM-P-0114-13 0.600 0.100 0.500 0.050
ASTM-P-0114-14 0.800 0.010 0.050 0.100
ASTM-P-0114-15 1.000 0.300 1.000 0.150
ASTM-P-0114-16 0.400 0.050 0.600 0.250
ASTM-P-0114-17 0.000 0.000 0.000 0.000
ASTM D-6550 Olefin Content of Gasolines by SFC
Stock Olefin Calibration Standard
D-6550-CONC
D-6550-CONC-5ML
At stated Conc. by Wt. %
Wt. %
1-Nonene 2.5
Cyclohexene 5
1-Hexene 5
1-Octene 5
1-Decene 5
2-Methyl-1,3-butadiene 5
4-Methyl-1-pentene 5
1,5-Hexadiene 3
$ 80 / 1 x 1 mL
$ 350 / 1 x 5 mL
15 comps.
Wt. %
3-Methyl-1,3-pentadiene 2
2-Methyl-1-butene 25
2-Methyl-2-pentene 10
1-Heptene 10
2-Methyl-1-octene 2.5
2-Methyl-1-heptene 5
5-Methyl-1-hexene 10
Originally designed for D-6550-00
Technical Note
AccuStandard worked in conjunction with
the D-02 technical committee and Shell
Oil to develop this stock Olefin Standard
proven useful in creating the required
calibration curve.
182
AccuStandard’s Quality System is Certified to comply with the International ISO 9001:2000 Quality Standard