Chemical Reference Standards AccuStandardÂ®

More documents

Recommendations

Info

Petrochemical ASTM Standards ASTM Standards ASTM D-3610 Total Cobalt in Alumina-Base Cobalt- Molybdenum Catalyst by Potentiometric Titration Cobalt Oxide Standard D-3610-93-1 $ 50 / 1 x 100 mL Cobalt oxide @ 1500 µg/mL in Water This SIM DIS (Simulated Distillation or GCD) Method is used to determine the boiling range distribution of gasoline and gasoline components. ASTM Method D-3710 is used for petroleum products and fractions with a final boiling point of 500°F (260°C) or lower. By having an insight into the composition of the gasoline blend, essential data for the calculation of vapor pressure and a prediction of the D-86 distillation curve can be made. Qualitative Calibration Standard D-3710-QUAL D-3710-QUAL-PAK Approx. Wt./ Wt. % n-Butane 4.5 n-Butylbenzene 3.2 n-Decane 3.2 2,4-Dimethylpentane 5.4 n-Dodecane 3.2 n-Heptane 9.7 n-Hexane 5.4 2-Methylbutane 9.7 2-Methylpentane 5.4 2-Methylpropane 1.5 Quantitative Calibration Standard ASTM-D3710 ASTM-D3710-PAK Vol./Vol. % n-Butylbenzene 3.5 n-Decane 3.5 2,4-Dimethylpentane 5.8 n-Dodecane 3.5 n-Heptane 10.5 n-Hexane 5.8 2-Methylbutane 10.5 2-Methylpentane 5.8 Originally designed for D-3610-88 (re-approved 1993) ASTM D-3710 (Reapproved 1999) Boiling Range Distribution of Gasoline & Gasoline Fractions by GC Originally designed for D-3710-95 $ 30 / 1 x 1 mL SAVE $ 120 / 5 x 1 mL 19 comps. Approx. Wt./ Wt. % n-Octane 5.4 n-Pentadecane 2.2 n-Pentane 7.6 n-Propane 1.5 n-Propylbenzene 4.3 n-Tetradecane 2.2 Toluene 10.8 n-Tridecane 2.2 p-Xylene 13 $ 25 / 1 x 1 mL SAVE 36% $ 80 / 5 x 1 mL 16 comps. Vol./Vol. % n-Octane 5.8 n-Pentadecane 2.3 n-Pentane 8.1 n-Propylbenzene 4.7 n-Tetradecane 2.3 Toluene 11.6 n-Tridecane 2.3 p-Xylene 14.0 ASTM D-3798 Analysis of p-Xylene by GC AccuStandard’s R & D team has developed a special highly purified p- Xylene designed for ASTM Method D-3798 specifications. The incorporation of this p-Xylene into the formulation allows the analytical chemist to qualitatively and quantitatively measure the impurities in the p-Xylene feedstock streams. p-Xylene Impurity Standard with Internal Standard D-3798-IS D-3798-IS-PAK At stated conc. by weight Wt./Wt. % n-Pentane 0.15 n-Octane 0.15 Benzene 0.15 Toluene 0.15 Ethylbenzene 0.15 p-Xylene 98.65 m-Xylene 0.15 p-Xylene Impurity Standard without Internal Standard D-3798-10ML D-3798-10ML-PAK At stated conc. by weight Wt./Wt. % n-Pentane 0.15 n-Octane 0.15 Benzene 0.15 Toluene 0.15 Ethylbenzene 0.15 $ 30 / 1 x 1 mL SAVE 33% $ 100 / 5 x 1 mL 11 comps. Wt./Wt. % o-Xylene 0.15 Cumene 0.15 Propylbenzene 0.15 Total Analytes 100 plus n-Undecane* (ISTD) 0.500 grams $ 65 / 1 x 10 mL SAVE $ 260 / 5 x 10 mL 10 comps. Wt./Wt. % p-Xylene 98.65 m-Xylene 0.15 o-Xylene 0.15 Cumene 0.15 Propylbenzene 0.15 Technical Note Bulk Packaged p-Xylene without Internal Standard Other suggested internal standards can be used in conjunction with the bulk packaged D-3789 1 x 10 mL ampule to meet your company’s application. If you prefer to save yourself from making standards, contact AccuStandard’s Technical Department with your unique formulation for a custom quotation. The custom quotation request form is located in the back of this catalog. ASTM D-2887-99 Boiling Range Distribution of Petroleum Fractions by GC Calibration Solution DRH-002S-R1 * $ 50 / 1 x 1 mL DRH-002S-R1-PAK * SAVE $ 200 / 5 x 1 mL At stated conc. in Chloroform 17 comps. µg/mL n-Hexane 600 n-Heptane 600 n-Octane 800 n-Nonane 800 n-Decane 1200 n-Undecane 1200 n-Dodecane 1200 n-Tetradecane 1200 n-Hexadecane 1000 µg/mL n-Octadecane 500 n-Eicosane 200 n-Tetracosane 200 n-Octacosane 100 n-Dotriacontane 100 n-Hexatriacontane 100 n-Tetracontane 100 n-Tetratetracontane 100 * Can be shipped by Air and Sea ASTM D-3831 Manganese in Gasoline by AA Spectroscopy Originally designed for D-3831-98 Manganese Stock Solution D-3831 $ 65 / 1 x 100 mL Manganese @ 1.0 g Mn / gal (264.2 mg Mn / L) in Methyl isobutyl ketone 150 AccuStandard’s Quality System is Certified to comply with the International ISO 9001:2000 Quality Standard
Petrochemical ASTM Standards ASTM D-4059 Polychlorinated Biphenyls in Insulating Liquids by GC Originally designed for D-4059-96 Aroclors in PCB-Free Transformer Oil (At 2 concentrations in Transcrest W130) Conc. 1 x 1 mL 5 x 1 mL Aroclor # (ppm w/w) Cat. No. Price Price Aroclor 1016 50 C-216-ST-1 $ 25 C-216-ST-1-PAK $ 90 500 C-216-ST-2 30 C-216-ST-2-PAK 120 Aroclor 1221 50 C-221-ST-1 25 C-221-ST-1-PAK 90 500 C-221-ST-2 30 C-221-ST-2-PAK 120 Aroclor 1232 50 C-232-ST-1 25 C-232-ST-1-PAK 90 500 C-232-ST-2 30 C-232-ST-2-PAK 120 Aroclor 1242 50 C-242-ST-1 25 C-242-ST-1-PAK 90 500 C-242-ST-2 30 C-242-ST-2-PAK 120 Aroclor 1248 50 C-248-ST-1 25 C-248-ST-1-PAK 90 500 C-248-ST-2 30 C-248-ST-2-PAK 120 Aroclor 1254 50 C-254-ST-1 25 C-254-ST-1-PAK 90 500 C-254-ST-2 30 C-254-ST-2-PAK 120 Aroclor 1260 50 C-260-ST-1 25 C-260-ST-1-PAK 90 500 C-260-ST-2 30 C-260-ST-2-PAK 120 Aroclor 1262 50 C-262-ST-1 25 C-262-ST-1-PAK 90 500 C-262-ST-2 30 C-262-ST-2-PAK 120 Aroclor 1268 50 C-268-ST-1 25 C-268-ST-1-PAK 90 500 C-268-ST-2 30 C-268-ST-2-PAK 120 Ethylene Glycol Stock Standard D-4291-93 D-4291-93-PAK Neat Individual Aroclors Z-008 Aroclor # Cat. No. Price / Unit (Kit) Aroclor 1016 C-216N $ 25 /100 mg 100 mg Aroclor 1221 C-221N-50MG 25 /50 mg 100 mg Aroclor 1232 C-232N 25 /10 mg 10 mg Aroclor 1242 C-242N-50MG 25 /50 mg 100 mg Aroclor 1248 C-248N-50MG 25 /50 mg 10 mg Aroclor 1254 C-254N-50MG 25 /50 mg 100 mg Aroclor 1260 C-260N-50MG 25 /50 mg 10 mg Aroclor 1262 C-262N-50MG 25 /50 mg 10 mg Aroclor 1268 C-268N 25 /10 mg 10 mg Kit of above 9 Aroclors Z-008-R1 $ 125 / 9 vials ASTM D-4291 (Reapproved 1998) Trace Ethylene Glycol in Used Engine Oil Originally designed for D-4291-93 $ 20 / 1 x 1 mL SAVE $ 80 / 5 x 1 mL Aroclor-free Transformer oil also available as: T-W130 $ 5 / 1 x 1 mL ASTM Standards Ethylene glycol @ 2000 µg/mL in water ASTM D-4294 Sulfur in Petroleum Products by ED-XRF Spectroscopy D4294 Meets EPA Guidelines for RFG Analysis See Sulfur section for AccuStandard’s comprehensive line of Certified Sulfur Calibration Standards designed for matrix specific applications as described in Method D-4294 in section 9.0 (Calibration & Standardization). ASTM D-4377 Water in Crude oils by Potentiometric Karl Fischer Titration See page 147 for AccuStandard’s comprehensive line of Certified Karl Fischer Water Standards. For MSDSs visit our website at www.AccuStandard.com 151
Page 1 and 2:
Chemical Reference Standards INTERN
Page 3 and 4:
PRINTED ON RECYCLED PAPER Table of
Page 5 and 6:
AccuStandard, At Your Service Inter
Page 7 and 8:
PCBs AccuStandard is known througho
Page 9 and 10:
PCB Congeners Individual PCB Congen
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
PCB Congeners EU Formulations PCB C
Page 19 and 20:
PCB Congeners Mixtures for Congener
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
PCB Congeners PCB Congener Calibrat
Page 27 and 28:
PCB Metabolites & Derivatives Indiv
Page 29 and 30:
Aroclors Individual Aroclors (in 1
Page 31 and 32:
Flame Retardants Individual PBDEs S
Page 33 and 34:
Flame Retardants Method 1614 Polybr
Page 35 and 36:
Flame Retardants Other Flame Retard
Page 37 and 38:
Dibenzofurans Individual Dibenzofur
Page 39 and 40:
PAHs & Derivatives Individual PAHs
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Nitroaromatics Individual Nitroarom
Page 47 and 48:
Aliphatic & Aromatic Amines & Deriv
Page 49 and 50:
Nitrogen Containing Compounds Nitro
Page 51 and 52:
Pesticides & Herbicides Pesticides,
Page 53 and 54:
Pesticides & Herbicides Pesticides
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Pesticides & Herbicides The followi
Page 89 and 90:
Pesticides & Herbicides Method 531
Page 91 and 92:
Volatiles Volatile Organic Compound
Page 93 and 94:
Volatiles Volatiles (in 1 mL of sol
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Volatiles Chlorinated Organic Volat
Page 101 and 102:
Volatiles USEPA Method 503.1 Purgea
Page 103 and 104:
Volatiles USEPA Method 8010, 8010A
Page 105 and 106: Volatiles USEPA Method 8021B Purgea
Page 107 and 108: Volatiles USEPA Method 8240 & 8260
Page 109 and 110: Volatiles VOC Selected Target Compo
Page 111 and 112: Phenols & Derivatives Phenols & Der
Page 113 and 114: Phenols & Derivatives Method 8040A
Page 115 and 116: Alcohols Alcohols (in 1 mL of solve
Page 117 and 118: Aldehydes Method 554 Carbonyl Compo
Page 119 and 120: Ketones Ketones (in 1 mL of solvent
Page 121 and 122: Haloacetic Acids Haloacetic Acids (
Page 123 and 124: Refrigerants Refrigerants (CFCs) (i
Page 125 and 126: Fuel & Hydrocarbon Standards Fuels
Page 127 and 128: Fuel & Hydrocarbon Standards Gasoli
Page 129 and 130: Fuel & Hydrocarbon Standards Leakin
Page 131 and 132: Explosives Explosives (in 1 mL of s
Page 133 and 134: Allergens It has been estimated tha
Page 135 and 136: Allergens Allergens (in 1 mL of sol
Page 137 and 138: Allergens by Type COMPOUND CAS NO.
Page 139 and 140: Food Analysis Analytes for Food Ana
Page 141 and 142: Food Analysis ASTM Method D6042-92
Page 143 and 144: Food Analysis AOCS, Method Ce1-62 A
Page 145 and 146: Food Analysis Typically 98+% Pure,
Page 147 and 148: Perfluorooctanoic Miscellaneous & A
Page 149 and 150: Sulfur Please note that 4 ounces is
Page 151 and 152: Petrochemical The Petrochemical ind
Page 153 and 154: Physical Properties ASTM D-1319 Ole
Page 155: Petrochemical ASTM Standards ASTM D
Page 159 and 160: Petrochemical ASTM Standards ASTM D
Page 183 and 184: Petrochemical ASTM Standards Throug
Page 189 and 190: Inorganic Standards Single Element
Page 191 and 192: ICP NoHaz Size (No Hazardous shippi
Page 193 and 194: ICP NoHaz Size (No Hazardous shippi
Page 195 and 196: ICP ICP Multi-Element Standard Solu
Page 197 and 198: Plasma Emission / Mass Spectroscopy
Page 199 and 200: AA NoHaz Size (No Hazardous shippin
Page 201 and 202: Wear Metals These Standards were fo
Page 203 and 204: Ion Chromatography Ion Chrom - Anio
Page 205 and 206: CAS Number Index CAS # PAGE CAS # P
Page 207 and 208:
CAS Number Index CAS # PAGE CAS # P
Page 209 and 210:
Catalog Number Index CAT .NO. PAGE
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 226 and 227:
Custom Quotation Request Form From:
Page 228:
Chemical Reference Standards INTERN
show all

Chemical Reference Standards AccuStandardÂ®

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?