Download our Microwave Switches Selection ... - Teledyne Relays

Series (Commercial/Elite) CCR-38/CR-38 CCR-38 CCR-38 CCR-58/CR-58
Configuration SP3T to SP6T SP7T to SP8T SP9T to SP10T SP3T to SP6T
SERIES OVERVIEW
Switch Function Normally Open Normally Open Normally Open Normally Open
Frequency
Commercial Model
Elite Model
DC to 18 GHz
DC to 22 GHz
DC to 12.4 GHz DC to 10 GHz DC to 26.5 GHz
DC to 26.5 GHz
Coil Voltages Available 12, 15, 24, 28 12, 15, 24, 28 12, 15, 24, 28 12, 15, 24, 28
Connectors Available SMA SMA SMA SMA
Temperature
Range
Commercial Model
Elite Model
–40°C to +65°C
–55°C to +85°C
–40°C to +65°C –40°C to +65°C –40°C to +65°C
–55°C to +85°C
Special Features Multi-throw Multi-throw Multi-throw
High Frequency
Multi-throw
Typical Contact Life
Switch with Indicator Contacts
5,000,000 cycles
1,000,000 cycles
3,000,000 cycles
1,000,000 cycles
3,000,000 cycles
1,000,000 cycles
5,000,000 cycles
1,000,000 cycles
Typical RF Performance
VSWR (max)
Insertion Loss (max)
Isolation (min)
DC–4 GHz : 1.05:1
4–8 GHz : 1.10:1
8–12 GHz : 1.20:1
12–16 GHz : 1.20:1
16–20 GHz : 1.20:1
20–22 GHz : 1.20:1
DC–4 GHz : 0.10 dB
4–8 GHz : 0.20 dB
8–12 GHz : 0.20 dB
12–16 GHz : 0.30 dB
16–20 GHz : 0.30 dB
20–22 GHz : 0.30 dB
DC–4 GHz : 80 dB
4–8 GHz : 80 dB
8–12 GHz : 80 dB
12–16 GHz : 80 dB
16–20 GHz : 75 dB
20–22 GHz : 75 dB
DC–2.3 GHz : 1.15:1
2.3–3 GHz : 1.20:1
3–8 GHz : 1.30:1
8–12.4 GHz : 1.40:1
DC–2.3 GHz : 0.20 dB
2.3–3 GHz : 0.25 dB
3–8 GHz : 0.30 dB
8–12.4 GHz : 0.40 dB
DC–2.3 GHz : 80 dB
2.3–3 GHz : 70 dB
3–8 GHz : 65 dB
8–12.4 GHz : 60 dB
DC–2.3 GHz : 1.15:1
2.3–3 GHz : 1.20:1
3–6 GHz : 1.30:1
6–8 GHz : 1.40:1
8–10 GHz : 1.60:1
DC–2.3 GHz : 0.20 dB
2.3–3 GHz : 0.25 dB
3–6 GHz : 0.30 dB
6–8 GHz : 0.40 dB
8–10 GHz : 0.60 dB
DC–2.3 GHz : 80 dB
2.3–3 GHz : 70 dB
3–6 GHz : 65 dB
6–8 GHz : 60 dB
8–10 GHz : 60 dB
DC–4 GHz : 1.05:1
4–8 GHz : 1.10:1
8–12 GHz : 1.20:1
12–16 GHz : 1.20:1
16–20 GHz : 1.20:1
20–22 GHz : 1.20:1
DC–4 GHz : 0.10 dB
4–8 GHz : 0.20 dB
8–12 GHz : 0.20 dB
12–16 GHz : 0.30 dB
16–20 GHz : 0.30 dB
20–22 GHz : 0.30 dB
DC–4 GHz : 80 dB
4–8 GHz : 80 dB
8–12 GHz : 80 dB
12–16 GHz : 80 dB
16–20 GHz : 75 dB
20–22 GHz : 75 dB
Self Cutoff (Latching Only) — — — —
Indicator Contacts
Options
Self Cutoff and Indicator Contacts
(Latching Only)
— — — —
TTL Interface
TTL Decoder
Moisture Seal
Narrow Body — — — —
Coil Transient Suppression
Diodes and Polarity Protection
Diode
Sub-D Connector
Typical Mechanical Outline
1.75 x 2.27 x 1.75 in.
44.5 x 57.7 x 44.5 mm
See Page 32
2.50 x 2.87 x 2.50 in.
63.5 x 72.9 x 63.5 mm
See Page 34
3.10 x 2.77 x 3.10 in.
78.7 x 70.4 x 78.7 mm
See Page 34
1.75 x 2.50 x 1.75 in.
44.5 x 63.5 x 44.5 mm
See Page 32
© 2013 Teledyne Coax Switches (800) 351-7368 • www.teledynecoax.com ‪ +44 (0) 1236 453124 • www.teledyne-europe.com Page 5