PRODUCT CATALOG - Exlar

GSX Series Linear Actuators
Actuator Rod End Options
B
A
*A Dim = 40mm
D
øC
B
D
øC
øE
Male
Thread
øE
Female
Thread
F
GSX20
in (mm)
GSX30
in (mm)
GSX40
in (mm)
GSX50
in (mm)
GSX60
in (mm)
A B øC D øE F Male U.S. Male Metric Female U.S. Female Metric
0.813 B (20.7) 0.375 (9.5) A 0.500 D(12.7) 0.200 (5.1) øC 0.440 (11.2) 0.750 (19.1) 3⁄8 – 24
B
UNF – 2A M8 x 1 6g
D
5/16 – 24 UNF – 2B øC M8 x 1 6h
0.750 (19.1) 0.500 (12.7) 0.625 (15.9) 0.281 (7.1) 0.562 (14.3) 0.750 (19.1) 7/16 – 20 UNF– 2A øE M12 x 1.75* 6g 7/16 – 20 UNF – 2B M10 x 1.5 6h
1.500 (38.1) 0.750 (19.1) 1.000 (25.4) 0.381 (9.7) 0.875 (22.2) 1.000 (25.4) 3⁄4 – 16 UNF – 2A M16 x 1.5 6g 5/8 – 18 UNF – 2B M16 x 1.5 6h
Male
Thread øE
Female
F
1.625 (41.3) 1.125 (28.6) 1.375 (34.9) 0.750 (19.1) 1.250 (31.8) 1.750 (44.5) 1 – 14 UNS Thread – 2A M27 x 2 6g 1 – 14 UNS – 2B M24 x 2 6h
2.500 (63.5) 1.250 (31.8) 1.750 (44.5) 0.550 (14.0) 1.625 (41.3) 1.750 (44.5) 1 1/4 – 12 UNF – 2A M30 x 2 6g 7/8 – 14 UNF – 2B M25 x 1.5 6h
Part numbers for rod attachment options indicate the through hole size or pin diameter. Before selecting a spherical rod
eye for use with a GSX series actuator, please consult the information on the anti-rotation option for the GSX actuators.
D
Spherical Drod eyes will allow the rod to rotate if the G load is not held.
øG
F
E
D
øF
Rod Clevis Dimensions
A
øB
E
øG
D
E
D
øF
B
A
C
H
C
J
K
B
A
C
H
K
øJ
H
K
øJ
A B C D E øF øG H øJ K
E
GSX20 RC038
in (mm) A
GSX30 RC050
in (mm)
GSX40 RC075
in (mm)
GSX50 RC100
in (mm)
GSX60 RC138
in (mm)
0.787 (20)
A
0.787 (20) 1.574 (40) 0.287 (7.3)
B
0.375 (9.5) 0.375 (9.5) 0.75 (19.1) NA NA 3/8-24
0.75 (19.1) 0.75 (19.1) 1.50 (38.1) 0.50 (12.7) 0.765 (19.43) 0.50 (12.7) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 7/16-20
C
1.125 (28.58) 1.25 (31.75) A 2.375 (60.3) 0.625 (15.88) 1.265 (32.13) 0.75 (19.1) 1.50 (38.1) 1.25 (31.75) 1.25 (31.75) 3/4-16
1.625 (41.2) 1.500 (38.1)
øA
3.125 (79.4) 0.750 (19.1) 1.515 (38.5) 1.000 (25.4) 2.000 (50.8) 1.500 (38.1) 1.500 (38.1) 1-14
2.00 (50.8) 2.125 (53.98) 4.125 (104.78) 1.00 (25.4) 2.032 (51.6) 1.375 (34.93) 2.75 (69.85) 2.00 (50.8) øD 2.00 (50.8) 1-1/4 - 12
C
B
C
Drawings subject to change. Consult DExlar for certified drawings.
32 9.52.500.6200 | www.exlar.com
F
A