Savannah Dresser with Door - Mamas & Papas

FITTING OF THE DOORS
Step 19:
Slide the hinges onto the mounting plates.
The ‘U’ in the hinge arm slides around the
head of the screw in the mounting plate.
It is best to start with the top hinge
then the bottom.
Note:
Slide home both hinges then tighten
screw A onto the mounting plate.
Repeat for the second door, then
gently close the doors.
A
LEVELLING THE DOORS ON THE SAVANNAH DRESSER/CHANGER
Step 20:
The Savannah dresser/changer can now be placed in the
position you want.
Important: Before use, the Savannah dresser/changer
must be placed on a stable level surface.
If when you have placed the Savannah
dresser/changer in a level position the doors are not
aligned correctly then you will have to adjust the
hinges to compensate. To do this follow the
information given in Steps 21 and 22.
Step 21:
Making small adjustments to the width of the gap
between the doors, loosen screw A then turn screw
B either clockwise or anti-clockwise until the gap
between the doors is even then re-tighten screw A.
ADJUSTING THE GAP BETWEEN THE DOORS
B
A
– 10 –