Power Connector Systems

More documents

Recommendations

Info

Power Connectors & Interconnection Systems Power POD Connectors for Intel's ITANIUM II Processors (Continued) Voltage Regulation Module (VRM) Connectors The rigid construction of the Power POD Housing ensures the contact normal force is maintained across the entire connector width. The recessed power and signal contacts ensure the contacts are not overstressed during an angled entry of the mating pcb card. The Power POD Connector / Flex Circuit is supplied preassembled in order to maintain precise control on the manufacturing process. The final assembly is delivered as shown, ready for soldering to the VR circuit board. While the Tyco Electronics Power POD Connector is identical for all applications, each flex circuit is customized for each specific customer. The photo shows just one configuration of flex circuit design. This allows maximum flexibility in how the power and signals are transferred to the POD circuit boards. Note: Part Numbers are created to satisfy customer flex circuit requirements. Please contact Tyco Electronics for a list of available part numbers. ITANIUM is a trademark of Intel Corporation. Close Contact Proximity and Short Current Path Delivers Low Inductance for Optimum Power Delivery 166 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Power Connectors & Interconnection Systems CROWN CLIP Series Sockets Product Facts ■ Compact design ■ High performance CROWN BAND contacts ■ Currents to 350 Amps 1 ■ Mates with solid or laminated blades ■ Supports true Hot-Plug (Current Interruption)2 ■ Float Mount option reduces mating forces ■ Meets UL (USR & CNR), and CSA safety requirements ■ All CROWN CLIP Products in this section are RoHS compliant. Typical Applications ■ Bus Bar based power distribution ■ Power racks ■ Rack mounted switching power supplies Notes: 1 Dual CROWN CLIP Socket using nickel plated mating tab, equivalent rating for other CROWN CLIP Socket designs is 300A 2 Current interruption requires a gold plated, solid mating tab, and is not currently supported using a laminated mating tab CROWN CLIP sockets are compact, high-current socket connectors for high current bus bar power distribution. Using ELCON high performance CROWN BAND technology, CROWN CLIP Sockets are available in single pole format to mate with a solid blade, handling up to 350 Amps, or in dual pole format to mate with laminated bus bar tabs for feed and return currents. Product Highlights Hot-Plug Design CROWN CLIP sockets also comply with safety regulatory requirements for current interruption under load. Compliance is achieved by a contact design that restricts the effects of arcing to areas that do not compromise the integrity of the connection. Hot-plugging requires a gold plated mating blade. Safety Agency Compliance CROWN CLIP sockets comply with the UL1977 standard and CSA standard C22.2 No. 182.3- M1987. Tyco Electronics will work with customers to obtain application specific regulatory certifications if needed. R Sample Application CROWN CLIP Sockets allow hot-plugging of rackmounted switching power supplies. Photo reproduced courtesy of Unipower Corporation. Bus Bar Products Radiused Edge Chamfered Edge Mating Blades Recommendations for customer supplied mating blades are: Insertion Length — .650 [16.50] minimum, 1.00 [25.40] maximum Thickness — .125 [3.18] or .118 [3.00] Material — Copper, gold or nickel plated, with chamfered or rounded mating edge Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666 167
Page 1 and 2:
AMP & ELCON Power Connectors & Inte
Page 3 and 4:
Power Connectors & Interconnection
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116: Power Connectors & Interconnection
Page 165: Power Connectors & Interconnection
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Global Contacts Americas Argentina
show all

Power Connector Systems

Create successful ePaper yourself

Delete template?

Save as template?