Power Connector Systems

More documents

Recommendations

Info

Power Connectors & Interconnection Systems AMP Drawer Series Connectors — Miniature Power Drawer (MPD) Connectors Product Facts ■ High mating cycle life ■ Low Mating and Un-mating force (< 0.2lbs per contact) ■ Single-piece molded housing ■ Molded-in guide pins provide generous blind-mateability ■ Sizes: 3 – 10 positions ■ Compact size is ideal for distributed DC power applications ■ Two Levels of contact sequencing ■ One contact for either solder or press-fit termination ■ Hardware — Less or traditional shoulder bolt mounting ■ Minimum of 3mm contact wipe on shortest power contact ■ All MPD connectors in this section are RoHS compliant Cable Mounted Products Specifications Up to 15 amps per contact 250 mating cycle durability +/- 1.25mm radial mis-alignment capability. (Total float is 2.5mm!) 1.6mm sequencing distance — ideal for modular sheet metal construction applications Minimum of 3mm contact wipe on shortest power contact Maximum continuous operating temperature — 105°C UL 94 V-0 High-temperature thermoplastic housings The new Miniature Power Drawer connector combines a high density power interface in a blind-mateable wire-to-board connector. The MPD contact interface has been previously qualified to requirements similar to BellCore GR-1217 in board-to-board applications. Now available in a crimp-to-wire version, the contacts are rated for up to 15 Amps on 14 AWG wire. In addition, the MPD contacts are designed to meet UL 1977 Hot-Plug requirements for up to 7.8 Amps at 48VDC. The connection consists of a vertical pcb mountable receptacle and a panel mounted floating plug. The vertical receptacle pcb tails are designed for use in either through-hole solder or press-fit applications. The float-mount plug is easily installed from the inside of the chassis without any additional hardware, lending itself to easy assembly of pre-made cable assemblies. Additionally, the staggered wire exit pattern permits the maximum number of contact interfaces in the least amount of connector volume. The compact design is ideal for bringing power to small rack-mounted devices such as 1U Computer Servers and Telecommunications Switches. The 3mm centerline satisfies UL 1977 safety requirements for 48 VDC distributed power applications. For higher voltage applications such as AC input, the contacts can be selectively loaded to handle up to 300 V AC or DC. Technical Documents Product Specification 108-1998 Application Specification 114-13067 82 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666
Power Connectors & Interconnection Systems AMP Drawer Series Connectors — Miniature Power Drawer (MPD) Connectors (Continued) Crimp Contacts Current Ratings Standard Power — 10 Amps High Power — 16 Amps Material and Finish Standard Power: Crimp Blade Contacts — Brass Receptacle Contacts — Phos. Bronze. Finish — 0.38µm Gold over 1.27µm Nickel High Power: Blades — High Conductivity Cu Alloy Receptacle — High Conductivity Cu Alloy Finish — 1.27µm Gold over 1.27µm Nickel Contact Mating Length (Min.) — Type A — 4.6mm Type B — 3.0mm Hot-Pluggability (With High Current Contacts only) — 250 Cycles — 7.8 Amps @ 48VDC Note: All contacts are Sn plated in the crimp barrel or Sn in pcb interface Crimp Blade Contacts Wire Type Cycles Mating Part Number Size Length Strip / Loose Piece Standard A 1489128-8 / 1-1489128-4 100 18-20 Power B 1489128-7 / 1-1489128-3 AWG High A 1-1489128-0 / 1-1489128-6 250 Power B 1489128-9 / 1-1489128-5 Standard A 1489757-2 / 1-1489757-0 100 14-16 Power B 1489757-1 / 1489757-9 AWG High A 1489757-6 / 1-1489757-2 250 Power B 1489757-5 / 1-1489757-1 Heavy Duty Miniature (HDM) Applicator for AMP-O-LECTRIC Model G Machine - #1385248-3. PRO-CRIMPER Hand Tool #354940-1, Die set # 91363-2 Cable Mounted Products Plugs and Receptacles Materials UL 94V-0 Thermoplastic 105°C Max. Operating temperature Note: Vertical PCB Mt. Receptacles supplied with press-fit ACTION PIN contacts. Part Number Number of Positions Panel Mt. Plug PCB Mt. Receptacles Snap-In Shoulder Bolt Standard Power High Current 3 1489127-1 — 1489715-1 1-1489715-1 4 1489127-2 1489701-1 1489715-2 1-1489715-2 5 1489127-3 — 1489715-3 1-1489715-3 6 1489127-4 — 1489715-4 1-1489715-4 7 1489127-5 — 1489715-5 1-1489715-5 8 1489127-6 — 1489715-6 1-1489715-6 9 1489127-7 — 1489715-7 1-1489715-7 10 1489127-8 — 1489715-8 1-1489715-8 Note: All part numbers are RoHS compliant. Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44 (0) 800-267-666 83
Page 1 and 2:
AMP & ELCON Power Connectors & Inte
Page 3 and 4:
Power Connectors & Interconnection
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32: Power Connectors & Interconnection
Page 81: Power Connectors & Interconnection
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Global Contacts Americas Argentina
show all

Power Connector Systems

Create successful ePaper yourself

Delete template?

Save as template?