MultiRAE - Shawcity Limited

PGM-50 Diagnostic & Service Procedure
PROGRAM MODE
Instantaneous display of values
[N] + [M] for 3 seconds:
Security level = 0: No action
Security level = 1: Password check
Wrong password: Instantaneous display
Correct password: Programming mode
Security level = 2: Programming mode
[N]: Toggle backlight
[Y]: Test alarm/stop alarm
[M]
Display sensor positions
[M]
Display peak values
[M]
Display minimum values
[M]
Display STEL values
[M]
Display TWA values
[M]
Display battery voltage
[M]
Display clock / run time / internal temperature
[M]
Is unit configured for manual datalog
Yes: Display Start/Stop datalog
[Y]: Start or stop datalog
[M]: Go to “Display LEL gas name”
No: Display datalog mode
[M]
Display LEL gas name
[M]
Display VOC gas name
[M]
Communicate with PC
[Y]: Monitor will pause OK
[Y]: Ready…
[N]: Return to Instantaneous display
[M] or [N]
Return to Instantaneous display
30