catalog TELE - CONTA-CLIP
catalog TELE - CONTA-CLIP
catalog TELE - CONTA-CLIP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
M1MTNI<br />
Block diagram<br />
Mains decoupler Series OCTO<br />
< All-pole disconnection<br />
< Automatic operation<br />
< Automatic off (manual on for test purpose)<br />
< up to 1000W lamp load<br />
< Minimised DC test voltage in switched off state (200 to 250mV)<br />
< Width 35mm<br />
< Installation design<br />
M1MTNI<br />
Connections<br />
Current<br />
output I2<br />
Current<br />
output I1<br />
+ - IN2<br />
Width 12,5mm<br />
Current<br />
+ input I2<br />
-<br />
7<br />
5<br />
IN1<br />
1<br />
3<br />
8<br />
6<br />
OUT1 OUT2<br />
2<br />
4<br />
+ -<br />
+<br />
Current<br />
- input I1<br />
Type<br />
ONF3 230V AC<br />
Do not operate inputs for voltage and current simultaneously!<br />
Dimensions<br />
Art.No. (PQ1) 2330900<br />
Art.No. (PQ10) -<br />
EAN13-Code 900866200126<br />
Measured variable<br />
Detection of no load condition<br />
Adjustable range 5 to 200mA (Activation current I ON<br />
)<br />
for adaption to charcteristic of connected loads<br />
Release current<br />
Test voltage<br />
Controls<br />
Indicators (LEDs)<br />
Functions<br />
Tripping delay<br />
fixed, approx. 70% of adjusted activation current<br />
200 to 250mV DC monitoring voltage at disconnected mains<br />
I ON<br />
• Function<br />
U • R<br />
1: Automatic operation (automated disconnected mains at no load condition)<br />
0: manual ON for test purpose<br />
fixed, approx. 6s<br />
Rise time fixed, approx. 0,5s<br />
Supply<br />
Output<br />
Width<br />
Certificates<br />
Mechanical<br />
design<br />
Terminal capacity<br />
Ambient<br />
conditions<br />
Accessories<br />
230V AC<br />
terminals L-N<br />
2 NO contacts<br />
250V, 16A AC<br />
35mm<br />
CE • GOST<br />
Self-extinguishing plastic housing, IP rating IP40 • Mounted on DIN-Rail TS 35 in accordance with EN 60715 • Mounting position any •<br />
Shockproof terminal connection according to VBG 4 (PZ1 required), IP rating IP20 • Tightening torque max. 1Nm<br />
1 x 0,5 to 2,5mm² with/without multicore cable end • 1 x 4mm² without multicore cable end • 2 x 0,5 to 1,5mm² with/without multicore cable end<br />
• 2 x 2,5mm² flexible without multicore cable end<br />
Ambient temperature: -25 to 55°C (in accordance with IEC 60068-1) • Storage temperature: -25 to +70°C • Transport temperature: -25 to<br />
+70°C • relative humidity: 15% to 85% (in accordance with IEC 60721-3-3 class 3K3) • Pollution degree: 2, if built in 3 (in accordance with IEC<br />
60664-1)<br />
Ballast GLE-ONF<br />
Page 240<br />
www.tele-online.com<br />
Page 241
Change language