18.01.2015 Views

EFIS-D100 Electronic Flight Information System - Dynon Avionics

EFIS-D100 Electronic Flight Information System - Dynon Avionics

EFIS-D100 Electronic Flight Information System - Dynon Avionics

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>EFIS</strong> Operation<br />

red and yellow as a visual alert. When below the 200-foot window, a rising tone is sounded; when above the 200-foot<br />

window, a descending tone is sounded. The visual climb or descend alert clears after recapturing the target altitude or 30<br />

seconds. Flying back inside the 150-foot capture window re-arms the alerter without any user interaction.<br />

If your system is configured to output voice via an HS34 or AP74 module, the voice alerts “climb” or “descend”<br />

are sounded, instead of tones. Additionally as you approach the altitude bug, the voice alert “altitude” is<br />

sounded when crossing 500 feet away from the bug.<br />

To simulate the altitude alerter on the ground, SYNC the altitude bug to your current altitude and then adjust the<br />

altimeter setting up or down. When you adjust the altimeter setting enough that the altitude is outside the 200-foot<br />

window, observe that the audio alert triggers and the bug alternates red and yellow.<br />

If you do not wish to use the altitude alerter function, push the ALM button in<br />

the BUGS menu to toggle it to OFF.<br />

LISTS – Using Checklists and Data Panels<br />

The <strong>Dynon</strong> Support Program allows you to enter your own checklists or select from included data panels. These<br />

checklists and data panels can then be uploaded to your <strong>EFIS</strong>-<strong>D100</strong> for quick access from the main menu or from your<br />

screen rotation. Data panels and checklists can be included beneath 5 user-configurable categories and each category can<br />

contain up to 5 checklists or data panels. By default the <strong>EFIS</strong>-<strong>D100</strong> is loaded with the following 5 categories: CHKLIST,<br />

RADIO, POH, EMGNCY and MISC. Each checklist/data panel can contain up to 14 lines of text and 40 characters per<br />

line.<br />

To load checklists and data panels onto your <strong>EFIS</strong>-<strong>D100</strong>, you must upload them as described in the <strong>Dynon</strong> Product<br />

Support Program help file. Pushing the LIST button displays the 5 main categories as set up in the <strong>Dynon</strong> Support<br />

Program. Press a button corresponding to the desired category to show the checklists and data panels beneath it. When<br />

<strong>EFIS</strong>-<strong>D100</strong> Pilot’s User Guide 5-5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!