13.11.2012 Views

LTI 20.20 Laser Speed Measurement Devices and ... - Tele-Traffic UK

LTI 20.20 Laser Speed Measurement Devices and ... - Tele-Traffic UK

LTI 20.20 Laser Speed Measurement Devices and ... - Tele-Traffic UK

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Alternatively if Prints are not taken as above <strong>and</strong> the disk is later analysed at an<br />

administrative unit then the DVD Disk becomes "best evidence" <strong>and</strong> must be<br />

retained. Any Prints taken in any such analysis are likely to be deemed “secondary<br />

evidence”.<br />

The Memory Buffer in the Printer, (if fitted) allows an Operator to target vehicles at<br />

very short intervals typically under one second <strong>and</strong> thus the equipment in this<br />

configuration remains as fast as the <strong>LTI</strong> <strong>20.20</strong> <strong>Laser</strong> in the conventional h<strong>and</strong> held<br />

mode.<br />

The video signal on the loop is simultaneously received by the DVD<br />

Recorder/Monitor <strong>and</strong> recorded on the DVD disk <strong>and</strong> in accordance with the<br />

comments above provides "best evidence". The data appears visibly in plain<br />

English <strong>and</strong> provides:<br />

© Copyright – <strong>Tele</strong>-<strong>Traffic</strong> (<strong>UK</strong>) Limited 2007<br />

TIME, DATE, SITE (or OFFICER'S REFERENCE)<br />

SPEED <strong>and</strong> RANGE TO TARGET<br />

If the target vehicle is above the set threshold speed then an asterisk will also<br />

appear.<br />

The position of the data on the Screen can be controlled by the Operator.<br />

At the same time, the data is inserted on the DVD Disk in an invisible form in a<br />

technique that resembles a bar code.<br />

This completes the sequence of events at the scene but as suggested above it is<br />

possible to analyse the DVD disk in the office situation. This process uses the<br />

Event Reader in conjunction with the Printer <strong>and</strong> means that when the video signal<br />

is played through it a search is automatically conducted for data over the threshold<br />

speed <strong>and</strong> a Video Print produced. This can be an unattended operation.<br />

Data can be downloaded simultaneously into a Computer for administrative<br />

purposes.<br />

In addition to the asterisk there is another symbol that appears only in the record<br />

mode. Situated in the bottom left corner of the screen there is a hash mark (#)<br />

feature which when pressed on screen allows the operator to mark an event.<br />

( An example of this might be if the operator has set the threshold limit to enforce for<br />

cars <strong>and</strong> sees another type of vehicle exceeding the permitted speed limit for that<br />

class of vehicle he can mark the event <strong>and</strong> still obtain a speed reading which can be<br />

downloaded <strong>and</strong> identified later. Other examples might be No seat belt or using a<br />

mobile phone whilst driving.)<br />

9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!