LTI 20.20 Laser Speed Measurement Devices and ... - Tele-Traffic UK

More documents

Recommendations

Info

TELE-TRAFFIC (UK) LIMITED LTI 20.20 LASER SPEED MEASUREMENT DEVICES AND LASTEC DVD RECORDING SYSTEMS LASTEC Concept is a customer configured speed detection and enforcement system for use in the tripod mounted mobile attended mode. For the core of the system it utilises a Type Approved LTI 20.20 laser speed detection device and a Type Approved Tele-Traffic Display Control Unit. The remainder is tailored to the user's requirements. The system retains all the flexibility and benefits of the narrow beam laser detection approach, whilst providing instant pictures at the scene if required and data capture capable of being processed historically. The medium used is DVD -R technology which offers greater flexibility for evidence gathering in speed enforcement. The system continues to be uncomplicated in operation but does require some operator skill. Once mastered it will provide pictorial evidence of speeding offences at ranges between 20 & 550m dependent upon the lens configuration. TELE-TRAFFIC (UK) Ltd provides support in both training and technical matters. If you require any assistance please do not hesitate to contact us at:- LaserTec Centre, C2 Harris Road, Warwick CV34 5JU Tel. No. 01926 407272 Fax No. 01926 407977 Email:tt@teletraffic.co.uk www.teletrafficuk.com
© Copyright – Tele-Traffic (UK) Limited 2007 IMPORTANT! THESE INSTRUCTIONS SHOULD BE READ IN CONJUNCTION WITH THE OPERATORS MANUAL FOR THE APPROPRIATE LTI 20.20 LASER SPEED MEASURING UNIT. NOTHING IN THESE INSTRUCTIONS SHOULD BE SEEN AS CONFLICTING WITH THAT MANUAL. The contents of this manual including the DVD disc remain the property of Tele- Traffic UK Ltd and are subject to Copyright. 2
Page 1: LTI 20.20 Laser Speed Measurement D
Page 5 and 6: © Copyright - Tele-Traffic (UK) Li
Page 7 and 8: 12. TAPELOGGER Here there is a chan
Page 17 and 18: 2. Highlight the ‘SET LIMIT OPTIO
Page 19 and 20: 6. Adjusting the speed limit in the
Page 21 and 22: 4. Highlight the ‘SET SPEED TIMEO
Page 23 and 24: 2. Highlight the ‘SET USER NUMBER
Page 25 and 26: 2. Highlight the ‘SET TIME/DATE
Page 27 and 28: 2. Highlight the ‘SET CROSS-HAIR
Page 29 and 30: 6. Adjusting the cross-hair positio
Page 31 and 32: 4. Highlight the ‘SET TYPE’ sel
Page 35 and 36: 2. Highlight the ‘SET CROSS-HAIR
Page 37 and 38: 6. Adjusting the cross-hair size in
Page 39 and 40: 4. Highlight the ‘SET GAP’ sele
Page 41 and 42: 2. Highlight the ‘SET DISPLAY OPT
Page 43 and 44: 6. Adjusting the display position i
Page 45 and 46: 4. Highlight the ‘SET BACKGROUND
Page 47 and 48: 2. Highlight the ‘DATA LOG OPTION
Page 49 and 50: 6. Navigating the data log in the
Page 51 and 52: 4. Highlight the ‘CLEAR DATA LOG
Page 53 and 54:
Once the data log has been cleared
Page 55 and 56:
4. Highlight the ‘DOWNLOAD DATA L
Page 57 and 58:
Once the data log has been download
Page 59 and 60:
4. Highlight the ‘DCU STATUS’ s
Page 61 and 62:
© Copyright - Tele-Traffic (UK) Li
Page 63 and 64:
1. Entering the DVD Menu by pressin
Page 65 and 66:
The Exit Option will always take th
Page 67 and 68:
If the disk is BLANK the following
Page 69 and 70:
If the correct disk has been loaded
Page 71 and 72:
6. Event marker. The Event marker s
Page 73 and 74:
The Operator now has two choices:-
Page 75 and 76:
Once the DVD disk is removed and th
Page 77 and 78:
AGAIN select the EXIT Option and th
Page 79 and 80:
Now select the REC Option and the f
show all

LTI 20.20 Laser Speed Measurement Devices and ... - Tele-Traffic UK

Create successful ePaper yourself

Delete template?

Save as template?