MICRImage Check Reader, Technical Reference Manual - MagTek

Excella MICR Check Reader
CLEANING
Figure 3-3. Stacking Checks in Input Hopper
Consult Section 2, Figure 2-1, for locations of the components described here.
Clean the outside of the Excella Reader unit with a soft, damp cloth and wipe with a dry cloth.
Open the unit. When the unit is open, as shown in Figure 3-4, check the path for debris. Clean
with a soft, damp cloth and wipe with a dry cloth.
Caution
To avoid damaging the read head, do not get the inside of the
check path wet.
18