MICRImage Check Reader, Technical Reference Manual - MagTek

Excella MICR Check Reader
IP ADDRESS SETUP
To run the ExcellaUSBConfig utility and setup the necessary IP addresses, use the following
instructions:
1. Run the “ExcellaUSBConfig” utility.
2. For “Network Device ID”, use the default “USB\VID_0801&PID_2230\123”.
3. For “Excella Device”, use the default “EXCELLA_USB”.
4. Click on the “Search” button to automatically assign a valid IP address for the PC Side and
Device Side; the boxes for these IP addresses will be automatically filled in.
5. For “Subnet Mask”, enter a new Subnet Mask or use the default: 255.255.255.0.
7. Click on “Apply”.
8. Click on “OK”.
9. Close the utility.
Note
For most applications, ignore the options “Display Network
Binding Information” and “Command Line Options”.
36