4G INSTALLATION GUIDE - Morpho
4G INSTALLATION GUIDE - Morpho
4G INSTALLATION GUIDE - Morpho
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Install Hardware<br />
Figure 4-4 <strong>4G</strong> SecureControl Mounting Hole Locations (in mm)<br />
4.3 <strong>INSTALLATION</strong> HARDWARE<br />
4.3.1 <strong>4G</strong> CR-PASS, <strong>4G</strong> V-FLEX LITE AND <strong>4G</strong> V-STATION LITE Quantity<br />
Qty 1 – Stainless Steel Wall mounting plate<br />
Qty 2 - #6-32 3/4" Philips pan-head screw<br />
Qty 2 - #6 1" Philips pan-head self-tapping screws<br />
Qty 2 - #4-8 1" nylon wall anchors<br />
The hardware listed above is provided to mount the mounting plate to the wall and the <strong>4G</strong><br />
CR-Pass or <strong>4G</strong> V-Flex Lite or <strong>4G</strong> V-Station Lite device to the mounting plate.<br />
Part # 430-<strong>4G</strong>-050-00-006<br />
© 2011 - L-1 Identity Solutions Inc. All rights reserved