Longhouse Dresser - Mamas & Papas

instructions
longhouse dresser/changer
FR023DC:V1/04/06
© Mamas & Papas (Holdings) Ltd. 2006
IMPORTANT: Please read instructions carefully
and keep for future reference

Longhouse Dresser/Changer
Before assembling your product...
Do not discard any packaging until you are certain you have all the correct components and fittings.
If any items are damaged or missing, please contact your retailer or Mamas & Papas on 0870 8307700.
Allow plenty of time and space when beginning the construction of your product.
Components
1 2
3
4
5
6
7
8
9
10
11
16
12
13
14 15
Item Name Part no. Qty
1 Left side panel 31158---0601 1
2 Middle panel 31158---0611 1
3 Right side panel 31158---0602 1
4 Shelves 31158---0618 2
5 Top rail 31158---0620 1
6 Bottom rail 31158---0624 1
7 Long shelves 31158---0607 1
8 Top 31158---0605 1
Item Name Part no. Qty
9 Base 31158---0606 1
10 Back panel 31158---0608 1
11 Doors 31158---0612 2
12 Drawer front 31158---0613 1
13 Drawer sides 31158---0614/15 2
14 Drawer base 31158---0617 1
15 Drawer back 31158---0616 1
16 Storage baskets 3
--

FITTINGS
A x 31 B x 31
Cam studs
C x 4
Cams
D x 33
Hinge plates
E x 9
Short screws
F x 17
Bolts
G x 4
Rail screws
H x 4
Hinge arms
I x 4
Handle
J x 1
Handle screw
Allen key
K x 3
Short base screws
Fitting code: 0357800000701
TOOLS
Cross-head screwdriver
Flat-head screwdriver
Hammer
--

1
STEP 1
Screw eight cam studs (A)
into the metal inserted in
the left side panel (1) and
middle panel (2) using a
cross-head screwdriver.
2
A
STEP 2
Slot six cams (B) into
the holes in the tops of
the left and middle side
panels.
Ensure that the arrows
on the tops of the cams
are facing the connecting
holes in the sides of the
panel once fitted.
A
--

STEP 3
Attach the four hinge
plates (C) to the right side
panel and middle panel
using eight short screws
(D) and a cross-head
screwdriver
D
C
3
STEP 4
Slot three cams (B) into
the holes in the tops of
the right side panel (3).
Ensure that the arrows
on the tops of the cams
are facing the connecting
holes in the sides of the
panel once fitted.
B
--

3
STEP 5
Screw fourteen cam studs
(A) into the metal inserts
in the right side panel
(3) and other side of the
middle panel (2) using a
cross-head screwdriver.
2
A
STEP 6
Insert twelve cams (B)
into the undersides of the
shelves (4).
4
B
--

4
3
STEP 7
Slot the two shelves (4)
onto the right side panel
(3).
Fasten the shelves to
the panel by turning the
cams clockwise using a
screwdriver.
2
STEP 8
Slot the middle panel
(2) onto the assembled
sections of the dresser/
changer.
Fasten the middle panel
to the shelves by turning
the cams clockwise with a
screwdriver.
--

STEP 9
Insert four cams (B) into
the holes in the ends of
the top (5) and bottom
(6) rails
Slot the top and bottom
rails onto the assembled
sections.
Fasten the rails into
position by turning the
cams clockwise using a
screwdriver.
Fasten the rails to the
rails to the middle panel
using two rail screws
(F) and a cross-head
screwdriver.
B
F
5
6
7
Step 10
Insert twelve cams
(B) into the holes in
underside of the long
shelves (7).
7
B
--

Step 11
Slot the long shelves (7)
onto the middle panel.
Fasten the long shelves
into place by turning the
cams clockwise with a
screwdriver.
7
7
Step 12
Slot the left side panel
(1) onto the assembled
sections.
Fasten it in place
by turning the cams
clockwise using a
screwdriver.
1
--

STEP 13
With the help of another
person carefully turn the
assembled sections over.
Slot the base (9) onto the
dowels in the sides and
middle panels.
Ensure that the grooves
in the base and the side
panels are aligned then
fasten in place using nine
bolts (E) and the allen key
(J).
E
J
9
STEP 14
Slot three short base
screws (K) into the holes
in the front of the base.
Tighten the screws into
the bottom rail using the
allen key (J).
K
J
-10-

A
STEP 15
Screw nine cam studs (A)
into the metal inserts in
the underside of the top
(8) using a cross-head
screwdriver.
8
STEP 16
Slot the top (8) onto the
assembled sections.
Fasten the top into place
by turning the cams
in the side and middle
panels clockwise with a
screwdriver.
8
-11-

10
D
STEP 17
Slot the back panel (10)
into the recesses in the
side panels, base and top.
Fasten the back panel into
place using the seventeen
short screws (D) and a
cross-head screwdriver.
STEP 18
Fasten the top rail to the
top using three rail screws
(F) and a cross-head
screwdriver.
F
-12-

11
G
STEP 19
Attach the two hinge
arms (G) to the doors
(11) using eight small
screws (D) and a crosshead
screwdriver.
Attach two of the handles
(H) to the doors using
two of the handle screws
(I).
D
H
I
STEP 20
Slot the hinge arms on
the door onto the hinge
plates and push them
down until they lock into
position.
The door can be removed
by pushing the button on
the end of the hinge arm
inwards.
-13-

Adjusting the gap
between the doors.
Loosen screw ‘A’, turn
screw ‘B’ clockwise or
anti-clockwise until the
gap between the doors is
equal then tighten screw
‘A’.
STEP 21
Adjusting the height of
the doors.
Loosen screws ‘C’ then
slide the hinge plate up
or down until the doors
are even then tighten the
screws.
Adjusting the angle of
the door.
Loosen screw ‘A’ and
slide the hinge arm either
forwards or backwards
until the door is vertical
then tighten screw ‘A’.
-14-

F
STEP 22
Attach the two drawer
sides (13) to the drawer
front (12) using six rail
screws (F).
Ensure that the grooves
in the drawer sides are
aligned with the groove in
the drawer front.
12
13
13
STEP 23
Slide the drawer base
(14) into the grooves in
the drawer sides.
Push the drawer base
along the grooves in the
sides and fully into the
groove in the drawer
front.
14
-15-

STEP 24
Slot the drawer back (15)
into position, ensure that
the base has fully slotted
into the groove in the
drawer back.
Fasten the drawer back
into position using the six
remaining rail screws (F).
15
F
STEP 25
Attach the two handles
(H) to the front of
the drawer using the
remaining handle screws
(I) and a cross-head
screwdriver.
H
I
-16-

STEP 26
Slot the runners on the
drawer sides into the
runners on the dresser/
changers sides.
Push the drawer fully into
the dresser/changer.
16
STEP 27
Insert the three storage
baskets (16) onto the
shelves on the right side
of the dresser/changer.
-17-

STEP 28
The dresser changer is
now fully assembled.
Check that all of the
fittings are fully tightened
before using the dresser/
changer.
-18-

INSTRUCTIONS FOR SAFE USE & maintenance
• WARNING: DO NOT LEAVE YOUR CHILD UNATTENDED. The safety of your child is your
responsibility.
• Before use, ensure the dresser/changer is on a stable, level surface.
• Do not allow children to climb on the dresser/changer.
• Never use the dresser/changer if any parts are broken or missing.
• Never pivot or drag the dresser on its feet, the dresser must always be lifted by at least
two people when moved.
• Do not place the dresser in the near vicinity of open fires or other sources of strong heat,
such as electric or gas fires.
• Always leave the dresser/changer clean and dry. Wipe away any spillage straight away.
The dresser can be cleaned with a damp cloth. Never use abrasive, bleach or strong
detergents.
• Check regularly that all fittings and screws are correctly tightened and are not
damaged. Loose screws can pinch parts of the body and clothing resulting in the risk of
strangulation.
• A changing mattress is not supplied with this product. We recommend that you only use
a Mamas & Papas changing mattress with the dresser/changer. Lay the changing mattress
on the changing surface, within the retaining rails.
Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in
these instructions. We reserve the right to change the specifications of any product without prior notice.
After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please
contact Customer Services on: 0870 8307700, or e-mail us at: customer.services@mamasandpapas.com.
Visit our website at www.mamasandpapas.com for the latest product information.
Guarantee
To validate this guarantee, fill in this coupon and return to: Mamas & Papas, Colne Bridge Rd, Huddersfield, HD5 0RH
Alternatively, call our Guarantee Registration Line on: 0870 8307700 or visit our website: www.mamasandpapas.com
Title (Mr/Mrs/Miss/Ms) First name ....................................................... Surname..............................................................
Address ............................................................................................................................................................................
............................................................................................................................. Postcode..............................................
Daytime Tel. No. ............................................................. e-mail..........................................................................................
Baby’s due date/date of birth ............................. Product purchased Longhouse Dresser/Changer
Purchase date................................................ Price..................................
If you would like to receive further information regarding new products, promotions and special offers from Mamas & Papas please tick the boxes indicating your
preferred method(s) of contact. Post ®; e-mail ®.
If you would like to receive information from carefully selected 3rd parties please tick the boxes indicating your preferred method(s) of contact. Post ®; e-mail ®.
-19-

www.mamasandpapas.com
Mamas & Papas
Colne Bridge Road
Huddersfield, HD5 0RH
customer services helpline: 0870 8307700
customer services email: customer.services@mamasandpapas.com