suzo-happ group

3M DI-NOC FILM
Frequently Asked Questions
How do I know how much DI-NOC to order
• Measurements for DI-NOC should be made in square feet NOT linear feet
• Measure the length and width of each side of your machine, adding an additional 1”
“bleed” on both the top and bottom for overage
• Rolls are 4’ in width and CANNOT be ordered in widths less than that.
The length with vary per style.
• Add the total square footage of each side to get the total square footage per
machine
• For OEMs, use of a Plotting Program will insure the least amount of product waste
How much DI-NOC is needed on common machines found on the casino floor
accessories
147
New
IGT TrimLine: 36 sq. ft.*
Aristocrat Mark 6: 40 sq. ft.*
Bally CineVision: 72 sq. ft.*
Bluebird Round Top WMS: 38 sq. ft.*
Atronic: 30 sq. ft.*
Bally S9000 and M9000: 36 sq ft.*
*Please note that all the above measurements are approximates only.
Final measurements are the responsibility of the customer as the area being
covered on the machine will vary depending on the customer’s preference.
How is DI-NOC sold
• DI-NOC is sold per square foot
• Orders placed for less than a full roll will always come 4’ in width.
• Price breaks apply to the purchase of a full roll
• A standard roll size is 4’ X 164’. Some rolls are available in different factory lengths.
• Prices vary by color and size of roll.
Can I order a custom color to match a finish in my casino
• Yes. There is a 20 roll minimum.
Can I apply a layer of DI-NOC on another layer DI-NOC Film
• Yes, one or more layers of DI-NOC Film can be applied to the first layer of
DI-NOC Film. It is not recommended to apply more than 3 layers on top of
each other.
Are there temperature limitations
• Recommended application temperature range is 61-82º F (68-77º F is preferred)
• Store film in a clean, dry environment; free from direct sunlight and at an ambient
temperature below 100º F. Use within one year of purchase
• The film was tested on an aluminum plate and exposed to temperatures ranging
from –22º F to 149º F for 12 days. No peeling or discoloration resulted
How do I get DI-NOC installed
Full professional installation
• Installation is quoted out on a project by project basis depending upon the total
number of machines and the location of those machines. Installation costs would
also include any travel expenses incurred by the installer.
With Your Own Trained Employees
• Training costs $995.00 per person. This includes classroom
instruction and materials.
• Training can be done on site or in the DI-NOC training
facility located in Baltimore, MD.
• Training done in Baltimore is $995 for a 1 day – 8 hour class.
• Travel expenses are the responsibility of the customer.
• On-site training is available for up to 5 students per class.
Are there other applications and markets for this product
The possibilities are endless...
• Elevators
• Walls & Columns
• Partitions
• Galleries & Museums
• Dining Areas
• Offices
• Escalators
• Casinos
• Cruise Ships
• Elevators
• Lobbies
• Restrooms
• Doors & Hallways
• Ceilings
2010/2011 Visit Our Wesite suzohapp.com