suzo-happ group

6-OUTLET POWER STRIP WITH
SURGE PROTECTOR
• Ideal for rows of vending
machines or games
• Protects equipment from
dangerous power surges and
spikes that can destroy delicate
electronic circuitry
• Lighted ON, OFF switch
• Built-in resettable circuit breaker
• Built-in brackets for easy
mounting
Part Number Description
49-0487-00 Six Outlet Power Strip with Surge
POWER STRIP WITH SURGE PROTECTOR
• 6 outlets
• 3 ft. power cord
• Heavy duty plastic case
• 1 MOV surge protection
• L-N surge protection
• EMI/RFI noise filtration
• LED indicator, 125V AC, 15 Amps
• UL listed, CSA
• Protect your equipment from power surges and spikes
• Integrated circuit breaker switch with auto reset
Part Number Description
49-0963-10 Power Strip with Surge Protector
• Prevents dangerous power surges
that can destroy delicate electronic circuitry
• Indicator light signals surge protection is on
• Maximum surge dissipation: 270 Joules
• 15A-125VAC, 1875 watts rating
• Clamping voltage: 330 volts
• Maximum spike current: 4500 amps
• Maximum surge voltage: 6000 volts
• Surge protection on all three lines
• Response time: Less than 1 nanosecond
• UL listed
Part Number Description
27-1007-00 Single Outlet Protector
SOCKET 7 CPU FAN
• 12VDC ball bearing fan
• 3 pin connector
• 9.21~10.3cfm
• 5000 rpm
• Noise level: 27~30dB
• Used on Sigma Slot Machines
• Dimensions: 2” x 2” x 1.25” with heat sink
• For AMD K6/K6-2/K6-III, Intel Pentium
60~266MHz, Cyrix 6x86, 6x86MX and MII
and IBM 6x86 processors
Part Number Description
80-0006-13 Socket 7 CPU Fan
• 125V AC, 15 Amps
• Rugged 6 foot cord
• UL listed
• Durable metal construction
SINGLE OUTLET SURGE PROTECTOR
electrical supplies
CPU COOLING FAN FOR ARISTOCRAT
• Cooling fan for Aristocrat Mark VI
• 3-wire connection
• Size: 40mm X 40mm X 10mm
Part Number Description
80-0006-62 CPU Cooling Fan for Aristocrat
• 15/16” x 3-1/2” x 3-1/2”
• 50/60 Hz
3-1/2” BALL BEARING FAN
Part Number Description
70-0226-00 115 Volt Fan
70-0226-10 12 Volt Fan
70-0226-50 Finger Guard for 3-1/2" Fan
COOLING FAN FOR MERIT CPU
• Ball bearing fan used in Merit Megatouch
for the CPU board
• Used on WMS Bluebird Machines
• 50mm x 50mm x 10mm
• 12VDC, 0.16A
Part Number Description
80-0006-15 Cooling Fan for Merit CPU
COOLING FAN FOR MERIT XL SERIES
• Cooling fan 12V DC 1.57" x 1.57" x 0.4" Vapo bearing
• 3-wire connection
Part Number Description
80-0006-16 Cooling fan for Merit XL Series
219
2009/2010
Visit Our Website suzohapp.com