suzo-happ group

Part Number
42PP0608
104 WATT POWER SUPPLY
• +5V 3~15 A, +12V 4 A, +24V 4 A
• 104 watts
• AC input 88-132VAC or
176-264VAC (switchable)
• CE and TUV approved
• High efficiency
• Industry standard
• Easy start up
• Green “power on” LED
• Overload protected
• Built in EMI filter
• Maximum noise minimization by
built in high speed diode
• Weight: 1.76 lbs
• 2” H x 4.33” W x 7.6” D
• 20 per case
Description
104 Watt Power Supply
New
power supplies 81
NEON SIGN POWER SUPPLY
• Replaces Several different sizes of standard transformers
• Supports up to 8 cathodes (4 tubes)
• Max. meters connected 4.4 meters (4 tubes x 1.1m)
• 1 max sec = 18.6 mA
• 1 max prim = 520mA
• Min. cathodes connected = 1 (1 tube)
• Min. meters connected = 0.32
• 1 max sec = 18.6mA
• 1 max prime = 100mA
®
New
POWER REQUIREMENTS
Voltage :
120 VAC, 50/60 Hz
Current :
0.66 A max (depends on load)
Power :
80 W max (depends on load)
INPUT CONNECTIONS
Two AWG 18 leads, 8 inches long, or power cord, 8 ft long, black or white
CONTROL (OPTIONAL)
Red (+) and brown (-) wires can be connected to an electronic controller to
modulate neon brightness or to gate the unit on and off
Maximum "on" voltage : 1.20 V
Minimum "off" voltage : 2.50 V
Control current :
1.6 mA (5 V control voltage)
Absolute max. control voltage : 15 V
OUTPUT CHARACTERISTICS
Output is isolated from input for maximum flexibility of application. Shorted output
supplies the rated current. Open circuit or excessive load will cause the unit to
shut down, but special circuit will attempt to automatically restart power up to
three times to avoid nuisance trips
Voltage :
8KV AC max. (actual voltage depends on load and
will be equal to or lower than this value.)
Current :
20 mA
OUTPUT CONNECTIONS GTO-10 leads, 12 inches long
DIMENSIONS
4.00 x 1.40 x 0.90 (max) inches
MOUNTING
Unit is mounted with two 8-32 x 3/4 inch nylon screws and nuts (provided)
Part Number Description
32-1036-00 Neon Sign Power Supply
2009/2010
Visit Our Website suzohapp.com