Philips QL Induction Lighting Systems - Philips Lighting

More documents

Recommendations

Info

Troubleshooting guide If you experience troubles using Philips QL induction lighting, please use this troubleshooting guide for a quick solution of your problem. Problem Page System is inoperative 33 Very short system life 34 Low lamp light output 35 Light flickering 36 32
System is inoperative Check Action See reference Is there power to the fixture no Correct external cause and check for normal operation. Are in-line fuses (or other devices such as photocells and sensors) blown, faulty, or causing the problem yes Replace or reset the faulty component(s), and check for normal operation. Is the mains voltage in accordance with the voltage on the generator's label no Use the correct generator. Are abnormal system conditions at fault yes Replace the failed system part and check for normal operation. (A) Has the system failed under normal conditions yes replace the failed system and check for normal operation. (B) Are the lamp, power coupler and generator compatible no Replace the incorrect component(s) and check for normal operation. (C) Is the line voltage correct no Correct the supply voltage to within the specified tolerance. (E) Problem solved no Contact experts for further problem solving at infoQL@philips.com. 33
Page 1 and 2: Photo courtesy of Seattle Public Li
Page 3 and 4: 1. General information on Philips Q
Page 5 and 6: The mounting flange should be mount
Page 7 and 8: 2. Luminaire design 2.1 Introductio
Page 9 and 10: consumption is 55W/85W/165W (see po
Page 11 and 12: Thermal radiation can also form a s
Page 13 and 14: 2. Testing the electrical strength
Page 15 and 16: Figure 22: Influence of reflector p
Page 17 and 18: 5.2 Electrical characteristics Ther
Page 19 and 20: 5.3.2 Luminous intensity diagrams A
Page 21 and 22: Average lumen gamma intensity (degr
Page 23 and 24: 6. Lighting installation and enviro
Page 25 and 26: 7. Service 7.1 General Although QL
Page 27 and 28: 8.7 Electrical characteristics Ther
Page 29 and 30: Luminaire measurement request form
Page 31: QL Induction Luminaire Design Check
Page 35 and 36: Low lamp light output Check Is ther
Page 37 and 38: Reference (A) Lamp base to power co
Page 39 and 40: Reference (D) Improper generator wi

Philips QL Induction Lighting Systems - Philips Lighting

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?