Contents Norgren Pneumatic Valve Products

Nugget 120 Series Valves
Pressure Options - Fixed Length Manifold Systems
Single Pressure
Dual Pressure
Dual Pressure/Twin Supply
Blanking Plug
Blanking Plugs
P 1
'5' '1' '3'
'4'
'2'
'3' '1' '5'
'5' '1' '3'
'4'
'2'
'3' '1' '5'
P 1 P 2
'5' '1' '3'
'4'
'2'
'3' '1' '5'
P 1
P 3
P 2
Y Y Y Y Y Y Y Y Y Y Y Y Y Z Z
Note the use of special FLM internal pilot
gaskets supplied with the manifold.
Again use special FLM internal pilot
gaskets supplied with the manifold.
Special twin supply gaskets should be
used with twin supply valves so that the
solenoid pilot supply is taken from port 5.
Pressure Options - Subbase Systems
Single Pressure
Dual Pressure
Gasket blanking
gallery number 1
P 1
5 1 3
'4'
'2'
3 1 5
P 1
5 1 3
'4'
'2'
3 1 5
P 2
W W W W W W
All valves have internal pilot gaskets.
W W W X X X
Note the use of external pilot supply gaskets for valves having P2
applied. This ensures that these valves are isolated from gallery
12/14 otherwise P1 = P2.
Gasket Key
The letters below each valve station indicate which valve to subbase gasket must be used in the configuration.
W = Internal Pilot Supply Gasket for Modular Subbase – 10041-C95 (black)
X = External Pilot Supply Gasket for Modular Subbase – 10041-C96 (red)
Y = Internal Pilot Supply Gasket for FLM and SIngle Subbase – 10238-C01 (grey)
Z = Twin Supply Gasket for FLM and Single Subbase – 10239-C01 (yellow)
Littleton, CO USA Phone: 303-794-2611 www.norgren.com VAL-9-17