Model 1590 Torqo II - Mesa Labs
Model 1590 Torqo II - Mesa Labs
Model 1590 Torqo II - Mesa Labs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
System Power Up<br />
What’s Inside<br />
This chapter contains the required information for powering<br />
up the <strong>Model</strong> <strong>1590</strong> <strong>Torqo</strong> <strong>II</strong>.<br />
Powering the <strong>Torqo</strong> <strong>II</strong><br />
The system is energized by first inserting the Input Power<br />
Cable into the receptacle, marked AC INPUT, on the rear<br />
panel of the tower and then plugging the other end of the<br />
cable into an AC Outlet.<br />
Now by actuating the switch on this panel the system will be<br />
energized and ready for use.<br />
The <strong>Torqo</strong> <strong>II</strong> is supplied for use with 110 VAC 60 HZ.<br />
Consult the factory or your local sales representative for<br />
operation with other voltages.<br />
The use of a surge protector with the <strong>Torqo</strong> is<br />
recommended as a protective measure against<br />
electrical noise.<br />
A Guide to Using <strong>Model</strong> <strong>1590</strong> <strong>Torqo</strong> <strong>II</strong> System Power Up 8