Model 1590 Torqo II - Mesa Labs
Model 1590 Torqo II - Mesa Labs
Model 1590 Torqo II - Mesa Labs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
About The Chuck Height Adjuster<br />
The Height Adjuster was designed to position the cap<br />
chuck at a convenient height for loading and unloading test<br />
samples while providing for the minimum amount of<br />
vertical chuck motion for the operator.<br />
Positioning The Chuck With The Height Adjuster<br />
Loosen the Height Adjuster Thumb Screw and position the<br />
cap chuck approximately 1" above the bottle cap when using<br />
the 1506A beverage clamp or 1" above the position that<br />
allows the test bottle to be loaded into the 1614 vise or other<br />
tooling systems. (See picture below)<br />
Height<br />
Adjuster<br />
Thumb<br />
Screw<br />
Now between tests just lift the cap chuck and let the<br />
magnetic height adjuster hold it in position<br />
A Guide to Using <strong>Model</strong> <strong>1590</strong> <strong>Torqo</strong> <strong>II</strong> Bottle and Cap Tooling 20