Model 1590 Torqo II - Mesa Labs

More documents

Recommendations

Info

Adjusting the 1506A Beverage Bottle Clamp This clamp is easily adjusted for a specific bottle size by following the procedure described below. Step 1: Loosen the Height Adjusting Knobs and raise the Ring Support Plate to a position greater than the height of the bottle to be tested and slightly tighten one knob. Now place the test sample on the base of the fixture. Step 2: Now loosen the knob, lower the Ring Support Plate to a position slightly above the sample and slightly tighten one knob again. Now engage the cap chuck to aid in centering the bottle. A Guide to Using Model 1590 Torqo II Bottle and Cap Tooling 16
Step 3: Now with both height-adjusting knobs loose, lower the Ring Support Plate until the Rubber Clamp Ring is resting on the bottle. Raise the 2 Clamp Handles so that they are at an angle of approximately 15° off horizontal and then tighten both Knobs. 15° Step 4: Push Clamp Handles down to secure a bottle and then raise, to the latched position, for loading the next sample. The clamping action should not distort the shape of the bottle. If this occurs, loosen the Height Adjusting Knobs and reduce the 15° angle. A Guide to Using Model 1590 Torqo II Bottle and Cap Tooling 17
Page 1: A Guide to Using Model 1590 Torqo I
Page 4 and 5: Bottle and Cap Tooling Quick Start
Page 7 and 8: Main Menu Screen ..................
Page 9 and 10: Overview Introduction is an indust
Page 11 and 12: Chapter 8: Test Types and Their Men
Page 13 and 14: Conventions The following conventio
Page 15 and 16: Checklist for Items supplied with t
Page 17 and 18: Initial Display After Power-up The
Page 19 and 20: Control Panel Features What's Insid
Page 21 and 22: Bottle and Cap Tooling What’s Ins
Page 23: About the 1506A Beverage Bottle Cla
Page 27 and 28: Vise Jaws For Rectangular Bottles S
Page 29 and 30: Quick Start What’s Inside This ch
Page 31 and 32: Performing A Test Now load the bott
Page 33 and 34: End of Test Display This screen dis
Page 35 and 36: Just like 1,2,3, the Torqo II has p
Page 37 and 38: In the Quick Start chapter of this
Page 39 and 40: The password must be entered precis
Page 41 and 42: Main Menu - Program Mode Select Mai
Page 43 and 44: Some of the system option keys will
Page 45 and 46: Pressing the View/Print Defaults Ke
Page 47 and 48: It is always a good idea to produce
Page 49 and 50: The profile manager for the removal
Page 51 and 52: Press the Name key to commence the
Page 53: Press the Peak Detect key to commen
Page 56: When a Test Profile is deleted all
Page 60 and 61: Removal Test Menus After selecting
Page 62 and 63: Removal and Bridge Test Menus After
Page 64 and 65: Close Test Menus After selecting Cl
Page 66: Strip Test Menus After selecting St
Page 70 and 71: Understanding the Operation Screen
Page 72: Setting the Re-application Torque W
Page 75 and 76:
View Print Screen The option keys s
Page 77 and 78:
Pressing the Data key will toggle t
Page 79 and 80:
Deleting and Replacing Data What's
Page 81 and 82:
Deleting a specific Sample # The fo
Page 83 and 84:
Performing a Life Test What's Insid
Page 85 and 86:
Using the Gold Bottle The following
Page 87 and 88:
The verification report will automa
Page 89 and 90:
1. Calibration Beam (Disk) 2. Calib
Page 91 and 92:
Installing the Calibration Fixture
Page 93 and 94:
Verification - Zero Screen Now foll
Page 95 and 96:
Torque in % Capacity Torque in lb-i
Page 97 and 98:
Performing a Calibration Press cali
Page 99 and 100:
If when a weight is applied, the me
Page 101 and 102:
Adjusting the Down Force Once conne
Page 103 and 104:
To adjust the foot put the Down For
Page 105 and 106:
Windows CE Desktop The System Setti
Page 107 and 108:
Communication Protocol Data is tran
Page 109 and 110:
Transmit Single Line End of Test Re
Page 111 and 112:
Clean the exterior with a mild dete
Page 114 and 115:
Index 1 1506A Beverage Bottle Clamp
Page 116:
Removal and Incremental Edit Menu 5
show all

Model 1590 Torqo II - Mesa Labs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?