Model 1590 Torqo II - Mesa Labs

More documents

Recommendations

Info

Operation and Graphic Display Screen Observe the Torque display in the center of the screen. It must read Zero before commencing a test. Operations Screen Zeroing the Display If the display does not read zero, press the Zero Key before proceeding with the sample test sequence. The display must never be zeroed when the cap chuck is connected to a bottle in the holding fixture. This action can result in an offset that will affect the measurements. A Guide to Using Model 1590 Torqo II Quick Start 22
Performing A Test Now load the bottle to be tested into the holding fixture and clamp the bottle in accordance with the procedure described in the Bottle and Cap Tooling section of this manual. Encage the cap chuck by gently pressing the drive extension rod down until the chuck engages the cap. Press the Open Key to commence the testing process. Live Display This screen provides a live display of torque during the test. Testing - Active Screen During the test, the Stop key can be pressed at anytime to immediately halt the test. A Guide to Using Model 1590 Torqo II Quick Start 23
Page 1: A Guide to Using Model 1590 Torqo I
Page 4 and 5: Bottle and Cap Tooling Quick Start
Page 7 and 8: Main Menu Screen ..................
Page 9 and 10: Overview Introduction is an indust
Page 11 and 12: Chapter 8: Test Types and Their Men
Page 13 and 14: Conventions The following conventio
Page 15 and 16: Checklist for Items supplied with t
Page 17 and 18: Initial Display After Power-up The
Page 19 and 20: Control Panel Features What's Insid
Page 21 and 22: Bottle and Cap Tooling What’s Ins
Page 23 and 24: About the 1506A Beverage Bottle Cla
Page 25 and 26: Step 3: Now with both height-adjust
Page 27 and 28: Vise Jaws For Rectangular Bottles S
Page 29: Quick Start What’s Inside This ch
Page 33 and 34: End of Test Display This screen dis
Page 35 and 36: Just like 1,2,3, the Torqo II has p
Page 37 and 38: In the Quick Start chapter of this
Page 39 and 40: The password must be entered precis
Page 41 and 42: Main Menu - Program Mode Select Mai
Page 43 and 44: Some of the system option keys will
Page 45 and 46: Pressing the View/Print Defaults Ke
Page 47 and 48: It is always a good idea to produce
Page 49 and 50: The profile manager for the removal
Page 51 and 52: Press the Name key to commence the
Page 53: Press the Peak Detect key to commen
Page 56: When a Test Profile is deleted all
Page 60 and 61: Removal Test Menus After selecting
Page 62 and 63: Removal and Bridge Test Menus After
Page 64 and 65: Close Test Menus After selecting Cl
Page 66: Strip Test Menus After selecting St
Page 70 and 71: Understanding the Operation Screen
Page 72: Setting the Re-application Torque W
Page 75 and 76: View Print Screen The option keys s
Page 77 and 78: Pressing the Data key will toggle t
Page 79 and 80: Deleting and Replacing Data What's
Page 81 and 82:
Deleting a specific Sample # The fo
Page 83 and 84:
Performing a Life Test What's Insid
Page 85 and 86:
Using the Gold Bottle The following
Page 87 and 88:
The verification report will automa
Page 89 and 90:
1. Calibration Beam (Disk) 2. Calib
Page 91 and 92:
Installing the Calibration Fixture
Page 93 and 94:
Verification - Zero Screen Now foll
Page 95 and 96:
Torque in % Capacity Torque in lb-i
Page 97 and 98:
Performing a Calibration Press cali
Page 99 and 100:
If when a weight is applied, the me
Page 101 and 102:
Adjusting the Down Force Once conne
Page 103 and 104:
To adjust the foot put the Down For
Page 105 and 106:
Windows CE Desktop The System Setti
Page 107 and 108:
Communication Protocol Data is tran
Page 109 and 110:
Transmit Single Line End of Test Re
Page 111 and 112:
Clean the exterior with a mild dete
Page 114 and 115:
Index 1 1506A Beverage Bottle Clamp
Page 116:
Removal and Incremental Edit Menu 5
show all

Model 1590 Torqo II - Mesa Labs

Create successful ePaper yourself

Delete template?

Save as template?