W1683 Manual - Grizzly Industrial Inc.
W1683 Manual - Grizzly Industrial Inc.
W1683 Manual - Grizzly Industrial Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AFTERMARKET<br />
SETUP ACCESSORIES<br />
To make the setup process easier and more<br />
accurate, consider some of the aftermarket<br />
products available.<br />
Here are some basic aftermarket items you<br />
might want to consider:<br />
• Rotacator ® — A rotating dial indicator on a<br />
magnetic base. Shown in Figures 34 and 35,<br />
this handy device allows you to set your<br />
table within .001" from being parallel with<br />
the cutterhead. The Rotacator ® is<br />
indispensable for adjusting the table rollers<br />
and is also great for precisely setting feed<br />
rollers, the chip breaker and the pressure<br />
bar.<br />
Figure 34. Measuring table-to-cutterhead with<br />
Rotacator ® in upward position.<br />
• Planer Pal ® — Using powerful neodymium<br />
magnets, Planer Pal ® (Figure 36) hold knives<br />
in place while freeing both hands to tighten<br />
the gib. Place one of these jigs on each end<br />
of the cutterhead, and you can set the<br />
knives in perfect alignment every time.<br />
OPERATIONS<br />
Figure 35. Measuring table roller height with<br />
Rotacator ® in downward position.<br />
28<br />
Figure 36. Planer Pal ® knife setting jig.
Change language