Cartridge Valves & Manifolds - HYDAC USA

More documents

Recommendations

Info

Solenoid Coils Solenoid Coils Features and Benefits Maximum Power - Minimum Space Perfectly layered wound coil packs more copper into smaller space. Perfect winding eliminates crossed wires and the potential for short-circuits. More copper windings ensure maximum solenoid force per current input. Continuous High Temperature Operation All HYDAC coils use high quality ‘Class N’ wire to ensure that coils can be continuously operated in extreme high temperatures and over-voltage without failure. Resistance to Thermal Shock HYDAC coils have passed what are commonly referred to as ‘thermal shock dunk tests’. This involves heating the coil to an extreme temperature for a period of time, then immersing in very cold salt water. The cycle is repeated and coil operation checked for signs of degradation. All Weather Resistant Encapsulated and internally sealed, the rugged steel shell construction prevents ingress of water. HYDAC coils have passed numerous ‘salt-spray tests’. No external sealing or waterproofing kits are needed. IP Rated HYDAC coils are rated from IP65 to IP69K. The quality of connector selected determines the IP rating. Deutsch DT04-2P achieves IP69K, while a DIN 43650 interface achieves IP65. Physically Robust Thick steel shell protects coil from physical damage. Zinc plating protects the shell from corrosion. Coils are DC wound All HYDAC coils are DC wound. AC designated coils from size 8, 10, 12, and 16 valves are internally full wave rectified. This results in a more reliable coil since inrush cycles are eliminated. There is no ‘buzz’ or ‘hum’ normally associated with ‘true AC’ coils. AC coils can operate on 50-60Hz supply. DC and AC coils are fully interchangeable. Coils for size 6 cartridges do not have built-in rectifiers and require external rectificatons of the AC signals. Suppression Diodes DC coils are available with an internal, bi-directional, transient voltage suppression diode. This can help protect the end users control circuit from induction voltages. Using a bi-directional diode means the coil is not polarity sensitive. Symmetric Coil Construction HYDAC coils can be installed face up or face down on the valve with no reduction in performance. Note: UL 583 listed coils available. Consult factory. 280 INNOVATIVE FLUID POWER PN#02087369 / 07.12 / CHY1110-1389
Solenoid Coils Solenoid Coils - Size 8, 10, 12 & 16 Cartridges Valves Coil Materials Class N high temperature magnetwire (200°C). Zinc plated steel shell. Polyamide encapsulation, black. Coil Information • Special voltages and terminations are available for OEM applications; consult factory • AC service coils are internally rectified and can be used in 50 Hz or 60 Hz power lines. The rectifiers used in these coils may require protection from high voltage surges in some electrical circuits containing highly inductive or capacitive components. These include certain types of motors, solenoids, relays and transformers. • AC voltage transient surges over 600 volts may require a voltage surge suppressor (MOV varistor) to be placed in parallel to the coil, as shown on the surge suppressor circuit diagram below. Coil Accessories: DIN Plug 1.38 (35) 1.93 (49) Voltage Suggested Varistor Part No.* Joule Rating 115 150LA10A 45 230 250LA40A 130 *Available from electronics supplier AC Voltage Diode Bridge Rectification Circuit Diagram Varistor 1.14 (29) EN 175301-803-A Part Number: 00394287 All measurements in inches (mm). 1.14 (29) Coil DC Coils Transient Voltage Supressor Bi-directional Diode (optional) Diagram • Bi-directional suppression diode protects coil winding from induction voltages PN#02087369 / 07.12 / CHY1110-1389 INNOVATIVE FLUID POWER 281
Page 1 and 2:
PN#02087369 / 07.12 / CHY1110-1389
Page 3 and 4:
Table of Contents Overview of Cartr
Page 5 and 6:
Overview Pressure Control Valves Pr
Page 7 and 8:
Overview Solenoid Valves Poppet Typ
Page 9 and 10:
Overview Solenoid Valves Poppet Typ
Page 11 and 12:
Overview Solenoid Valves Spool Type
Page 13 and 14:
Directional Control Valves Overview
Page 15 and 16:
Overview Size and Weight Saving Alt
Page 17 and 18:
Pressure Control Valves Overview HY
Page 19 and 20:
Pressure Control Valves Dimensions
Page 21 and 22:
Page 23 and 24:
Pressure Control Valves Type K Dime
Page 25 and 26:
Page 27 and 28:
Pressure Control Valves 2.52 2.52 (
Page 29 and 30:
Dimensions 2.09 Max. (53 (53 Max.)
Page 31 and 32:
Pressure Control Valves 2.66 Max. (
Page 33 and 34:
Pressure Control Valves 3.17 Max. (
Page 35 and 36:
3.29 (93.5) 3.29 (93.5) 3.29 (93.5)
Page 37 and 38:
1.18 (7.1) (7.1) (30) (7.1) (7.1) (
Page 39 and 40:
2.32 Max. (59.5 Max.) 2.32 Max. (59
Page 41 and 42:
Flow Control Valves Overview HYDAC
Page 43 and 44:
Flow Control Valves 1.65 Max. (42 M
Page 45 and 46:
Flow Control Valves 1.92 (48.7) Dim
Page 47 and 48:
Flow Control Valves Dimensions 1.86
Page 49 and 50:
Flow Control Valves Dimensions 1.82
Page 51 and 52:
Dimensions 2.06 Max. (52.3 Max.) 2.
Page 53 and 54:
2.09 Max. 2.09 (53 Max.) Max. (53 M
Page 55 and 56:
2.06 Max. 2.06 (52.3 Max.) (52.3 Ma
Page 57 and 58:
3.74 (95.1) 3.25 (82.6) Dimensions
Page 59 and 60:
0.79 (20) 5.20 (132) Dimensions 0.7
Page 61 and 62:
Check & Load Control Valves Overvie
Page 63 and 64:
Check & Load Control Valves Dimensi
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Check & Load Control Valves 3.33 Ma
Page 93 and 94:
Pressure Sensing Valves Overview HY
Page 95 and 96:
Pressure Sensing Valves Dimensions
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Solenoid Valves Spool Type Solenoid
Page 113 and 114:
Solenoid Valves Dimensions 2.28 Max
Page 115 and 116:
Solenoid Valves Dimensions 2.8 Max.
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Solenoid Valves Dimensions 1.14 (29
Page 147 and 148:
Solenoid Valves Dimensions 2.0 (50)
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Solenoid Valves Dimensions 2.0 (50)
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232: Solenoid Valves Dimensions 3.25 (82
Page 233 and 234: Solenoid Valves Dimensions 3.19 Max
Page 235 and 236: Solenoid Valves Dimensions 2.83 3.2
Page 245 and 246: 0.28 (7.1) Solenoid Valves Dimensio
Page 255 and 256: Directional Control Valves Overview
Page 257 and 258: Directional Control Valves Dimensio
Page 259 and 260: Directional Control Valves Dimensio
Page 261 and 262: Proportional Valves Overview HYDAC
Page 263 and 264: Proportional Valves Dimensions 3.85
Page 277 and 278: Hand Pumps Overview HYDAC offers tw
Page 279 and 280: Hand Pumps Dimensions 2.91 (73.9) 4
Page 281: Hand Pumps Dimensions 2.91 (73.9) 4
Page 285 and 286: Solenoid Coils Type 40-1836 (40 mm
Page 287 and 288: Solenoid Coils Type P40-1836 & P50-
Page 289 and 290: Solenoid Coils Coil Type 50 Dimensi
Page 291 and 292: Solenoid Coils Coil Type 32 Dimensi
Page 293 and 294: Line Bodies & Cavities Overview Des
Page 295 and 296: Line Bodies & Cavities Line Bodies
Page 297 and 298: Line Bodies & Cavities 4-way Line B
Page 299 and 300: Line Bodies & Cavities Size 12: FC1
Page 305 and 306: Manifold Accessories Size 08 Single
Page 307 and 308: Manifold Accessories Cavity Plugs M
Page 309 and 310: Miscellaneous Parts Solenoid Valve
Page 311 and 312: Form Tools Overview Description Cav
Page 313 and 314: CONTACT DATA Compact Hydraulics COM
Page 315 and 316: Manifold Assemblies HYDAC is a uniq
show all

Cartridge Valves & Manifolds - HYDAC USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?