Cartridge Valves & Manifolds - HYDAC USA

Flow Control Valves
SD10-01
Needle, Poppet Type
Up to 42 gpm (160 l/min) • 6000 psi (420 bar)
Description
A screw-in cartridge, adjustable variable orifice, hydraulic flow restrictor valve,
non-pressure compensated.
1 2
Operation
The SD10-01 controls flow in either direction from fully open to leaktight
shut-off by turning the adjustment feature clock-wise. Flow is non-pressure
compensated.
Features
• Adjustment needle cannot be backed out of the valve
• Desired setting may be locked down
• Aluminum knob option for ease of adjustment
• Complete shut-off
• Hardened parts to ensure minimal wear and extend service life
• All external surfaces zinc-plated
• Industry common cavity
Performance
Pressure Drop
400
300
200
100
bar
0
psi
0.25
5000
4000
3000
2000
1000
0
0 5 10 15 20
0
0.75
1
2
Measured at 158 SUS (34 cSt)
T Oil = 115 o F (46 o C)
1.50
40 80 120
Flow
3.00
3.50
6.00
25 30 35 40
gpm
l/min
160
Specifications
Operating Pressure
Nominal Flow
Adjustment Torque Required
Fluid Operating Temp. Range
Fluid Compatibility
Viscosity
6000 psi (420 bar)
42 gpm (160 l/min)
1.25 lbf.ft at 3000 psi (1.7 Nm at 210 bar)
2.21 lbf.ft at 5000 psi (3.0 Nm at 350 bar)
-4° to 248°F (-20° to +120°C)
(Consult factory for usage at temp. outside range.)
Mineral-based or synthetics with
lubricating properties
50 to 2000 SUS (7.4 to 420 cSt)
Filtration 21/19/16 or cleaner (per ISO 4406).
Use with filter rated ß10 ≥ 200.
Installation
No orientation restrictions
Cavity
FC10-2 (see Line Bodies & Cavities section)
Cavity Tools
Cartridge Weight
Cartridge Material
Seal Kits Buna-N
Viton ®
Rougher:
Finisher:
02580274
02580274
0.35 Lbs. (0.160 kg)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Anodized aluminum knobs. (option H)
Buna N or Viton ® o-rings, and
PTFE back-up rings.
FS102-N
FS102-V
P/N: 03033872
P/N: 03051757
42 INNOVATIVE FLUID POWER
PN#02087369 / 07.12 / CHY1110-1389