Cartridge Valves & Manifolds - HYDAC USA

More documents

Recommendations

Info

Check & Load Control Valves RV06A-01 Check Valve, Ball Type Up to 5 gpm (19 l/min) • 5000 psi (350 bar) Hydraulic Symbol Description A screw-in cartridge, ball type check valve for use as a blocking or load holding device. 2 1 Operation The RV06A allows flow from port 1 to port 2, while normally blocking flow in the opposite direction. The valve remains closed by bias spring until sufficient pressure is applied at port 1at which time the ball lifts off the seat and allows flow from port 1 to port 2. 2 1 Features • Hardened closing element to ensure extended service life and low leakage • Multiple bias spring options for back pressure application flexibility • Fast closing and seating • All external surfaces zinc-plated Specifications Operating Pressure Maximum Flow Rate Internal Leakage 5000 psi (350 bar) 5 gpm (19 l/min) 5 drops/min at 5000 psi (350 bar) Standard Cracking Pressures 5 psi (0.35 bar) 30 psi (2.1 bar) Fluid Operating Temp. Range -20° to 248°F (-29° to 120°C) Fluid Compatibility Mineral-Based or Synthetics with lubricating properties Viscosity 50 to 2000 SUS (7.4 to 420 cSt) Filtration 21/19/16 or cleaner per (ISO 4406) Installation No orientation restrictions Cavity FC06-2 (see Line Bodies & Cavities section) Cavity Tools Rougher: Finisher: 02582046 02582047 Cartridge Weight 0.1 lb (45 g) Cartridge Material Steel with hardened work surfaces. Zinc plated exposed surfaces. Buna N or Viton ® o-rings. Solid thermoplastic polyester back-up rings. Seal Kits Buna-N Viton ® FS062-N FS062-V P/N: 02610184 P/N: 02610185 Performance Pressure Drop bar psi 300 20 250 15 200 10 150 100 5 50 Measured at 135 SUS (28 cSt) T Oil= 100°F (38°C) 0 0 0 1 2 3 4 5 0 5 10 15 19 Flow gpm l/min 66 INNOVATIVE FLUID POWER PN#02087369 / 07.12 / CHY1110-1389
Check & Load Control Valves Dimensions 1.5 (38.1) 1.0 (25.4) 11/16” HEX Torque 12-15 ft-lbs (Torque 16-20 Nm) 0.55 (14) 2 2.23 (56.6) Model Code RV06A-01-AS4-N-30 Valve Model Body & Ports C = Cartridge only AS4 = SAE-4 Ports, aluminum Body SS4 = SAE-4 Ports, steel Body Seals N = Buna-N V = Viton ® Cracking Pressure 5 = 5 psi (0.35 bar) 30 = 30 psi (2.1 bar) 0.28 (7.1) 2 (50.8) 0.25 (6.4) 1 1.5 (38.1) 1.0 Thick (25.4) 2.0 (50.8) 0.82 (20.8) 0.06 (1.5) 0.25 (6.4) 2 1 ø0.47 (ø11.9) 9/16-18 UNF-2A ø0.69 (ø17.5) All measurements in inches (mm). Subject to technical modifications Standard Line Bodies* Code Part No Material FH062-AS4 02600491 FH062-SS4 02600490 Aluminum, anodized Steel, Zinc plated Pressure Rating 3500 psi (245 bar) 6000 psi (420 bar) *Please refer to Line Bodies & Cavities section for details Weight 0.34 lbs (0.15 kg) 1.0 lbs (0.45 kg) PN#02087369 / 07.12 / CHY1110-1389 INNOVATIVE FLUID POWER 67
Page 1 and 2:
PN#02087369 / 07.12 / CHY1110-1389
Page 3 and 4:
Table of Contents Overview of Cartr
Page 5 and 6:
Overview Pressure Control Valves Pr
Page 7 and 8:
Overview Solenoid Valves Poppet Typ
Page 9 and 10:
Overview Solenoid Valves Poppet Typ
Page 11 and 12:
Overview Solenoid Valves Spool Type
Page 13 and 14:
Directional Control Valves Overview
Page 15 and 16:
Overview Size and Weight Saving Alt
Page 17 and 18: Pressure Control Valves Overview HY
Page 19 and 20: Pressure Control Valves Dimensions
Page 23 and 24: Pressure Control Valves Type K Dime
Page 27 and 28: Pressure Control Valves 2.52 2.52 (
Page 29 and 30: Dimensions 2.09 Max. (53 (53 Max.)
Page 31 and 32: Pressure Control Valves 2.66 Max. (
Page 33 and 34: Pressure Control Valves 3.17 Max. (
Page 35 and 36: 3.29 (93.5) 3.29 (93.5) 3.29 (93.5)
Page 37 and 38: 1.18 (7.1) (7.1) (30) (7.1) (7.1) (
Page 39 and 40: 2.32 Max. (59.5 Max.) 2.32 Max. (59
Page 41 and 42: Flow Control Valves Overview HYDAC
Page 43 and 44: Flow Control Valves 1.65 Max. (42 M
Page 45 and 46: Flow Control Valves 1.92 (48.7) Dim
Page 47 and 48: Flow Control Valves Dimensions 1.86
Page 49 and 50: Flow Control Valves Dimensions 1.82
Page 51 and 52: Dimensions 2.06 Max. (52.3 Max.) 2.
Page 53 and 54: 2.09 Max. 2.09 (53 Max.) Max. (53 M
Page 55 and 56: 2.06 Max. 2.06 (52.3 Max.) (52.3 Ma
Page 57 and 58: 3.74 (95.1) 3.25 (82.6) Dimensions
Page 59 and 60: 0.79 (20) 5.20 (132) Dimensions 0.7
Page 61 and 62: Check & Load Control Valves Overvie
Page 63 and 64: Check & Load Control Valves Dimensi
Page 67: Check & Load Control Valves Dimensi
Page 91 and 92: Check & Load Control Valves 3.33 Ma
Page 93 and 94: Pressure Sensing Valves Overview HY
Page 95 and 96: Pressure Sensing Valves Dimensions
Page 111 and 112: Solenoid Valves Spool Type Solenoid
Page 113 and 114: Solenoid Valves Dimensions 2.28 Max
Page 115 and 116: Solenoid Valves Dimensions 2.8 Max.
Page 117 and 118: Solenoid Valves Dimensions 2.9 Max.
Page 119 and 120:
Solenoid Valves Dimensions 2.95 Max
Page 121 and 122:
Page 123 and 124:
Solenoid Valves Dimensions 2.8 Max.
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Solenoid Valves Dimensions 1.14 (29
Page 147 and 148:
Solenoid Valves Dimensions 2.0 (50)
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Solenoid Valves Dimensions 2.0 (50)
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Solenoid Valves Dimensions 2.83 3.2
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
0.28 (7.1) Solenoid Valves Dimensio
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Directional Control Valves Overview
Page 257 and 258:
Directional Control Valves Dimensio
Page 259 and 260:
Directional Control Valves Dimensio
Page 261 and 262:
Proportional Valves Overview HYDAC
Page 263 and 264:
Proportional Valves Dimensions 3.85
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Hand Pumps Overview HYDAC offers tw
Page 279 and 280:
Hand Pumps Dimensions 2.91 (73.9) 4
Page 281 and 282:
Hand Pumps Dimensions 2.91 (73.9) 4
Page 283 and 284:
Solenoid Coils Solenoid Coils - Siz
Page 285 and 286:
Solenoid Coils Type 40-1836 (40 mm
Page 287 and 288:
Solenoid Coils Type P40-1836 & P50-
Page 289 and 290:
Solenoid Coils Coil Type 50 Dimensi
Page 291 and 292:
Solenoid Coils Coil Type 32 Dimensi
Page 293 and 294:
Line Bodies & Cavities Overview Des
Page 295 and 296:
Line Bodies & Cavities Line Bodies
Page 297 and 298:
Line Bodies & Cavities 4-way Line B
Page 299 and 300:
Line Bodies & Cavities Size 12: FC1
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Manifold Accessories Size 08 Single
Page 307 and 308:
Manifold Accessories Cavity Plugs M
Page 309 and 310:
Miscellaneous Parts Solenoid Valve
Page 311 and 312:
Form Tools Overview Description Cav
Page 313 and 314:
CONTACT DATA Compact Hydraulics COM
Page 315 and 316:
Manifold Assemblies HYDAC is a uniq
show all

Cartridge Valves & Manifolds - HYDAC USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?