Cartridge Valves & Manifolds - HYDAC USA

More documents

Recommendations

Info

Hydraulic Symbol Check & Load Control Valves RV08A-01 Check Valve, Ball Type Up to 10 gpm (38 l/min) • 6000 psi (420 bar) Description A screw-in cartridge, ball type check valve for use as a blocking or load holding device. 2 1 Operation The RV08A allows flow from port 1 to port 2, while normally blocking flow in the opposite direction. The valve remains closed by bias spring until sufficient pressure is applied at port 1 at which time the ball lifts off the seat and allows flow from port 1 to port 2. Performance bar psi 10 150 1 2 Measured at 158 SUS (34 cSt) T oil = 115 o F (46 o C) Features • Hardened closing element to ensure extended service life and low leakage • Multiple bias spring options for back pressure application flexibility • Fast closing and seating • Low pressure drop • All external surfaces zinc-plated • Industry common cavity Specifications Operating Pressure Nominal Flow Internal Leakage Standard Cracking Pressures Fluid Operating Temp. Range Fluid Compatibility Viscosity 6000 psi (420 bar) 10 gpm (38 l/min) >2 drops/min. at 6000 psi (0.10 cc/min at 420 bar) 5 psi (0.35 bar) 15 psi (1.00 bar) 30 psi (2.00 bar) 70 psi (5.00 bar) -4° to 248°F (-20° to +120°C) (Consult factory for usage at temp. outside range.) Mineral-based or synthetics with lubricating properties 50 to 2000 SUS (7.4 to 420 cSt) Filtration 21/19/16 or cleaner (per ISO 4406). Use with filter rated ß10 ≥ 200. Installation No orientation restrictions Cavity FC08-2 (see Line Bodies & Cavities section) Cavity Tools Cartridge Weight Cartridge Material Seal Kits Buna-N Viton ® Rougher: Finisher 02580090 02580091 0.13 Lbs. (0.06 kg) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N or Viton ® o-rings. PTFE back-up rings. FS082-N FS082-V P/N: 03033920 P/N: 03051756 Pressure Drop 5 100 50 Cracking Pressure 70 psi Cracking Pressure 5 psi 0 0 0 2 4 6 8 gpm 10 l/min 0 5 10 15 20 25 30 35 Flow 68 INNOVATIVE FLUID POWER PN#02087369 / 07.12 / CHY1110-1389
Check & Load Control Valves Dimensions 7/8” HEX Torque 18.5-22 ft-lbs (Torque 25-30 Nm) Model Code Valve Model Body & Ports C = Cartridge only AS6 = SAE-6 Ports, aluminum Body SS6 = SAE-6 Ports, steel Body RV08A-01-C-N-05 2.38 (60.5) 2.0 (50) 1.50 (38) 0.28 (7.1) 2 0.61 (15.5) Seals N = Buna-N V = Viton ® Cracking Pressure 05 = 5 psi (0.35 bar) 15 = 15 psi (1.00 bar) 30 = 30 psi (2.00 bar) 70 = 70 psi (5.00 bar) 1 0.13 (3.3) 1.62 (41.1) 1.13 Thick (28.7) 2.0 (50) 1/4” HEX 0.37 (9.5) 0.08 (2.0) 1.1 (28) 2 1 ø0.5 (12.7) All measurements in inches (mm). Subject to technical modifications 3/4 - 16 UNF -2A Standard Line Bodies* Code Part No Material FH082-AS6 03011409 FH082-SS6 00560917 Aluminum, anodized Steel, Zinc plated Pressure Rating 3500 psi (245 bar) 6000 psi (420 bar) *Please refer to Line Bodies & Cavities section for details Weight 0.34 lb (0.15 kg) 1.0 lb (0.45 kg) PN#02087369 / 07.12 / CHY1110-1389 INNOVATIVE FLUID POWER 69
Page 1 and 2:
PN#02087369 / 07.12 / CHY1110-1389
Page 3 and 4:
Table of Contents Overview of Cartr
Page 5 and 6:
Overview Pressure Control Valves Pr
Page 7 and 8:
Overview Solenoid Valves Poppet Typ
Page 9 and 10:
Overview Solenoid Valves Poppet Typ
Page 11 and 12:
Overview Solenoid Valves Spool Type
Page 13 and 14:
Directional Control Valves Overview
Page 15 and 16:
Overview Size and Weight Saving Alt
Page 17 and 18:
Pressure Control Valves Overview HY
Page 19 and 20: Pressure Control Valves Dimensions
Page 23 and 24: Pressure Control Valves Type K Dime
Page 27 and 28: Pressure Control Valves 2.52 2.52 (
Page 29 and 30: Dimensions 2.09 Max. (53 (53 Max.)
Page 31 and 32: Pressure Control Valves 2.66 Max. (
Page 33 and 34: Pressure Control Valves 3.17 Max. (
Page 35 and 36: 3.29 (93.5) 3.29 (93.5) 3.29 (93.5)
Page 37 and 38: 1.18 (7.1) (7.1) (30) (7.1) (7.1) (
Page 39 and 40: 2.32 Max. (59.5 Max.) 2.32 Max. (59
Page 41 and 42: Flow Control Valves Overview HYDAC
Page 43 and 44: Flow Control Valves 1.65 Max. (42 M
Page 45 and 46: Flow Control Valves 1.92 (48.7) Dim
Page 47 and 48: Flow Control Valves Dimensions 1.86
Page 49 and 50: Flow Control Valves Dimensions 1.82
Page 51 and 52: Dimensions 2.06 Max. (52.3 Max.) 2.
Page 53 and 54: 2.09 Max. 2.09 (53 Max.) Max. (53 M
Page 55 and 56: 2.06 Max. 2.06 (52.3 Max.) (52.3 Ma
Page 57 and 58: 3.74 (95.1) 3.25 (82.6) Dimensions
Page 59 and 60: 0.79 (20) 5.20 (132) Dimensions 0.7
Page 61 and 62: Check & Load Control Valves Overvie
Page 63 and 64: Check & Load Control Valves Dimensi
Page 69: Check & Load Control Valves Dimensi
Page 91 and 92: Check & Load Control Valves 3.33 Ma
Page 93 and 94: Pressure Sensing Valves Overview HY
Page 95 and 96: Pressure Sensing Valves Dimensions
Page 111 and 112: Solenoid Valves Spool Type Solenoid
Page 113 and 114: Solenoid Valves Dimensions 2.28 Max
Page 115 and 116: Solenoid Valves Dimensions 2.8 Max.
Page 117 and 118: Solenoid Valves Dimensions 2.9 Max.
Page 119 and 120: Solenoid Valves Dimensions 2.95 Max
Page 121 and 122:
Solenoid Valves Dimensions 3.18 Max
Page 123 and 124:
Solenoid Valves Dimensions 2.8 Max.
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Solenoid Valves Dimensions 1.14 (29
Page 147 and 148:
Solenoid Valves Dimensions 2.0 (50)
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Solenoid Valves Dimensions 2.0 (50)
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Solenoid Valves Dimensions 2.83 3.2
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
0.28 (7.1) Solenoid Valves Dimensio
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Directional Control Valves Overview
Page 257 and 258:
Directional Control Valves Dimensio
Page 259 and 260:
Directional Control Valves Dimensio
Page 261 and 262:
Proportional Valves Overview HYDAC
Page 263 and 264:
Proportional Valves Dimensions 3.85
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Hand Pumps Overview HYDAC offers tw
Page 279 and 280:
Hand Pumps Dimensions 2.91 (73.9) 4
Page 281 and 282:
Hand Pumps Dimensions 2.91 (73.9) 4
Page 283 and 284:
Solenoid Coils Solenoid Coils - Siz
Page 285 and 286:
Solenoid Coils Type 40-1836 (40 mm
Page 287 and 288:
Solenoid Coils Type P40-1836 & P50-
Page 289 and 290:
Solenoid Coils Coil Type 50 Dimensi
Page 291 and 292:
Solenoid Coils Coil Type 32 Dimensi
Page 293 and 294:
Line Bodies & Cavities Overview Des
Page 295 and 296:
Line Bodies & Cavities Line Bodies
Page 297 and 298:
Line Bodies & Cavities 4-way Line B
Page 299 and 300:
Line Bodies & Cavities Size 12: FC1
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Manifold Accessories Size 08 Single
Page 307 and 308:
Manifold Accessories Cavity Plugs M
Page 309 and 310:
Miscellaneous Parts Solenoid Valve
Page 311 and 312:
Form Tools Overview Description Cav
Page 313 and 314:
CONTACT DATA Compact Hydraulics COM
Page 315 and 316:
Manifold Assemblies HYDAC is a uniq
show all

Cartridge Valves & Manifolds - HYDAC USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?