1 - Komet Scandinavia AB

JEL® GWF TOMILL
Thread Milling
1
2
3
Producing threads with the highest precision
The JEL® GWF TOMILL is suitable for producing large
thread diameters according to the 2/3 concept.
Our tools have a helix angle of approximately 15° to
the right, which provides for extremely quiet working
conditions. The cubic capacity complies with the JEL®
standard, and the shank is manufactured to DIN 6535.
JEL® GWF TOMILL SR
Thread milling right to the base of the hole.
JEL® GWF TOMILL GP
Using this tool greatly reduces machining time. Chamfering,
face milling and thread milling using one tool.
JEL® GWF TOMILL GS
Counterboring and thread milling in a single clamping
arrangement.
4
JEL® TOMILL CUT
Five holders with seven thread milling heads, three chamfering heads and, on request, grooving heads in various forms.
Thread milling
- For pitch 1,0 - 6,0 mm, as well as UN22 - UN4 T.P.I and
G 14 - G 11 T.P.I
- For metric- and metric fine ISO threads from M20x1,
as well as 13/16“ and G½
- Thread lengths up to 136 mm can be produced
90° chamfering and deburring
- Carbide chamfer head, TiAlN coated
- 90°-chamfering of the bore top as well as the bore exit
- Deburring of workpiece edges
- Chamfer heads with other angle (combinations) are
available on request
Grooving
- Grooving heads in various designs are available on request
- Solid carbide or PCD tipped
74
CNC programs for various control systems can be configured online at http://tpt.kometgroup.com or can be
obtained on request by telephoning: +49 711 788910. Also available as “TPT Mobile” app, with the same
features, on App Store for iPhone and iPad, and on Play Store for Androïd smartphones.